User manual

Operation
Vidikron VL-52 and VL-57 Installation/Operation Manual 27
PRE
L
IMINAR
Y
Main Menu The Main Menu is the starting point for accessing all DView functions.
(The ISF Calibration menu is not accessible until you enter a passcode.)
Source From the Main Menu, select Source to choose a video signal source.
The active source is indicated by an arrow (>) to its left; in this example, Input 1 is the active
source.
Aspect Ratio To change the aspect ratio (size and shape) of the projected image, select Aspect Ratio from
the Main Menu and press ENTER. Select the appropriate aspect ratio for the type of program
material being viewed; refer to
Table 4-1.
The currently-selected aspect ratio is indicated by an arrow (>) to its left; in this example, 16:9
is selected.
VL-52
Source
Aspect Ratio
Picture Adjust
Audio
Timer
Setup
ISF Calibration
>
Input1
Input2
Input3
Input4
RGB
HDMI1
HDMI2
>
16:9
4:3
Letterbox
IntelliWide
The aspect ratio selection persists until you change it. (It is not saved
independently for each input.)
Note