User manual

Installation

3-2 Vidikron Vision Model 90 Owner’s Operating Manual

3.2

Quick Setup

Table 3-1 gives a quick overview of the Vision 90 installation process. The sections following

this one provide detailed instructions.

Installation should be performed by a qualified custom video installation

specialist.

Table 3-1. Installation Overview

Step Procedure

For Details,

Refer to page...

1 Choose a location for the projector 3-3

2 Connect signal sources to the projector 3-10

3 Connect external controller to RS-232 port (optional) 3-14

4 Connect other home theater components to 12-volt trigger

outputs (optional)

3-14

5 Apply power to the projector 3-14, 4-1

6 For rear-screen and/or ceiling-mount installations, select the

proper picture orientation

4-1

7 Lens adjustments: projected image size (zoom), position

(shift) and focus

3-7, 4-2

8 Projector calibration: adjust the following for each input,

starting with Component SD; save settings when finished:

• Aspect ratio

• Brightness

• Contrast

• Color level

• Tint

• Input position

4-4 through 4-10

Note