Submittal Sheet

2 of 6
SM-PF 0612 (PolyAlloy Crimp)
Viega... The global leader in plumbing, heating and pipe joining systems
301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: [phone] • www.viega.com
©2012, FostaPEX
®
, GeoFusion
®
, MegaPress
®
, ProPress
®
, Seapress
®
and Viega
®
are registered trademarks of Viega GmbH & Co. Climate Mat
®
, Climate Panel
®
, Climate Trak
®
, MANABLOC
®
, PureFlow
®
, Radiant
Wizard
®
, S-no-Ice
®
, Smart Connect
®
, Snap Panel
®
, XL
®
and XL-C
®
are registered trademarks of Viega LLC. MiniBloc
™
, PolyAlloy
™
, ProRadiant
™
, Rapid Grid
™
, SmartLoop
™
and Zero Lead
™
are trademarks of Viega LLC;
ProPressG
™
and ViegaPEX
™
are trademarks of Viega GmbH & Co. KG.
Submittal
Package
Viega PolyAlloy PEX Crimp Fittings
for Use with Viega PEX Tubing
ANSI/NSF 61-G
cNSF
®
us pw-G
CSA B137.5
U.P. Code
UPC
®
ASTM F876 / F877
ASTM F1807 / F2159
ICC ES-PMG™ 1038
Technical Data
Materials:
Fittings................................................................. PolyAlloy
Crimp Rings......................................................... Copper (black)
MANABLOC Manifolds...................................... Polysulfone (plastic) PolyAlloy ttings
PEX Crimp Poly Manifolds................................... PolyAlloy crimp connections
Valves................................................................... PolyAlloy
ViegaPEX, ViegaPEX Ultra Tubing........................PEX (crosslinked polyethylene)
Applications
Viega PEX Crimp zero lead brass
and Polyalloy PEX Crimp ttings are
intended for use in potable water
systems. They can be directly buried
in soil but shall be wrapped (ttings
used in concrete shall also be
wrapped). Fittings are manufactured
with Viega PEX Crimp barbs for
use with ViegaPEX, ViegaPEX Ultra
tubing, crimp rings and tools.
Installation
• Use only ASTM F1807 crimp rings
and approved full circle crimp
tools to make connections.
• Keep ame and excessive heat
away from tubing and connections.
• Refer to the Viega PEX Installation
Manual for additional information.
“Zero Lead” identies Viega products
meeting the lead free requirements of
California and Vermont law, effective
January 1, 2010, as tested and listed
against NSF- 61, Annex G.
THREE SIMPLE STEPS TO A SECURE VIEGA
PEX CRIMP FITTING CONNECTION.
1 SLIDE CRIMP RING OVER END OF SQUARED OFF TUBING,
FULLY INSERT FITTING INTO TUBING AND POSITION THE
RING ⅛" TO ¼" FROM THE END OF TUBING.
2 KEEP THE TOOL AT 90° AND CLOSE THE HANDLES
COMPLETELTY. DO NOT CRIMP TWICE.
3 CHECK CRIMP WITH GO/ NO GO GAUGE.
Codes Approvals & Standards
90°
⅛" - ¼"