PEX Installation Manual

ManualsBrandsViega ManualsHeatingPEX Crimp Ring - 1" Diameter - Copper

Table Of Contents

1 Introduction
- 1.1 Viega PEX solutions
- 1.2 Viega PEX system concepts
2 Codes, Standards and Certifications
- 2.1 Codes
- 2.2 Standards
- 2.3 Certifications
- 2.4 Specifying Viega PEX Systems
3 Viega PEX Installation Methods
- 3.1 Home run systems
- 3.2 Combination systems
- 3.3 Branch and tee
4 Viega Manifolds
- 4.1 Viega manifold markings
5 Viega PEX Press Fittings
- 5.1 Viega PEX Press bronze
- 5.2 Viega PEX Press polymer
  - 5.2.1 Viega Smart Connect feature
- 5.3 Viega PEX Press fitting markings
- 5.4 PEX Press tools
  - 5.4.1 PEX Press hand tools
  - 5.4.2 PEX Press power tools
- 5.5 Making a Viega PEX Press connection with hand tool
6 Viega PEX Crimp Fittings
- 6.1 Viega PEX Crimp Eco Brass fittings
- 6.2 Viega PEX Crimp PolyAlloy fittings
- 6.3 Viega PEX Crimp fitting markings
- 6.4 The Viega PEX Crimp hand tools
- 6.5 Making a Viega PEX Crimp connection
7 ViegaPEX Ultra Tubing
- 7.1 ViegaPEX Ultra properties and performance
- 7.2 Tubing markings
8 Viega FostaPEX Tubing
- 8.1 FostaPEX properties and performance
- 8.2 Tubing markings
9 Viega PEX System Design and Sizing
- 9.1 ManaBloc
  - 9.1.1 Supply and distribution line sizing
  - 9.1.2 Plumbing code compliance (home run / parallel systems)
- 9.2 Combination systems
- 9.3 Branch-and-tee systems
10 System Sizing and Calculations
- 10.1 General
- 10.2 Viega PEX fittings
  - 10.2.1 Viega PEX Press friction loss — equivalent feet of SDR9 PEX tubing
  - 10.2.2 Viega PEX Crimp friction loss — equivalent feet of SDR9 PEX tubing
- 10.3 ViegaPEX Ultra tubing
11 Water Service Installation
- 11.1 Below grade and service line
- 11.2 Foundation penetration
- 11.3 Direct burial of Viega PEX fittings
- 11.4 Concrete
- 11.5 Installing under the slab
- 11.6 Protecting ViegaPEX Ultra tubing
12 Installing the ManaBloc
- 12.1 Overview and carton contents
- 12.2 Location
- 12.3 Draining the ManaBloc unit
- 12.4 Draining the ManaBloc system
- 12.5 Multiple ManaBloc installations
13 Mounting the ManaBloc
- 13.1 Mounting the ManaBloc between studs
- 13.2 Mounting the ManaBloc between studs without use of mounting straps
- 13.3 Mounting the ManaBloc - surface mount
- 13.4 Mounting the MiniBloc
- 13.5 Mounting Viega PEX Press and PEX Crimp Polymer manifolds
14 Installing Manifold Distribution Lines
- 14.1 Installing manifold distribution lines
- 14.2 Valve operation
- 14.3 Connecting distribution lines to the ManaBloc
  - 14.3.1 Port connections
- 14.4 Connecting distribution lines to fixtures
- 14.5 Water supply connections
15 Installing the ViegaPEX Ultra Tubing System
- 15.1 Handling ViegaPEX Ultra tubing
- 15.2 Uncoiling ViegaPEX Ultra tubing
- 15.3 Bending ViegaPEX Ultra tubing
- 15.4 Removing Viega PEX connections
- 15.5 Repairs
- 15.6 Freezing
- 15.7 Water heaters
- 15.8 Heaters, flues, vents and recessed lights
16 Fastening the Viega PEX System
- 16.1 Wood frame construction
- 16.2 Steel construction
- 16.3 Supporting ViegaPEX Ultra tubing
- 16.4 Noise and water hammer in PEX systems
- 16.5 Shower valves
- 16.6 Electrical grounding
- 16.7 Expanding foams
- 16.8 Fire Stop compounds
- 16.9 Tubing expansion
  - 16.9.1 Calculating expansion loops and offsets
- 16.10 Domestic hot water circulating systems
17 Installing Viega PEX Fittings
- 17.1 Stub out options
- 17.2 Copper connections
  - 17.2.1 Soldering Zero Lead alloy PEX fittings
- 17.3 Threaded connections
- 17.4 Valves
18 Pressure Testing Viega PEX Systems
- 18.1 General
- 18.2 Air testing
- 18.3 Leak detection
19 System Disinfection
- 19.1 General
- 19.2 California flushing requirements
20 Warranty

Viega LLC

100 N. Broadway, 6

Floor

Wichita, KS 67202

Phone: 1-800-976-9819

Fax: 1-316-425-7618

www.viega.us

IM-PF 724596 0416

This document subject to updates. For the most current Viega technical literature please visit www.viega.us.

Click Services -> Click Electronic Literature Downloads -> Select Product Line -> Select Desired Document

*Zero Lead identies Viega

products meeting the lead free requirements of NSF 61-G through testing under

NSF/ANSI 372 (0.25% or less maximum weighted average lead content).

, ProPress

, MegaPress

, XL

, XL-C

, SeaPress

, Smart Connect

SmartLoop

, PureFlow

, ManaBloc

, GeoFusion

, FostaPEX

, Radiant Wizard

S-NO-ICE

, Climate Panel

, Snap Panel

, Climate Mat

, and Climate Track

are

registered trademarks of Viega GmbH & Co. KG. ViegaPEX™ is a trademark of Viega

GmbH & Co. KG. MiniBloc™, ProRadiant™, Zero Lead™ and PolyAlloy™ are trademarks

of Viega LLC. Eco Brass

is a registered trademark of Mitsubishi Shindoh Co., LTD.

RIDGID

is a registered trademark of RIDGID, Inc. LoopCAD

is a registered trademark of

Avenir Software Inc. Radel

is a registered trademark of Solvay Advanced Polymers, LLC.