Install Instructions

Compact Tool
PureFlow
TM
System Installation Instructions
VIEGA NORTH AMERICA • Building Tomorrow’s Plumbing & Heating Technology ... Today
3 Alfred Circle • Bedford, MA 01730 • Ph: 877-Viega-NA • Fax: [phone] • E-Mail: [e-mail] • www.viega.com
PI-56057-02/04 1 of 2
1. Square off the tubing to
proper length.
2b. Slide press sleeve
fully over end of tubing.
3. Insert press tting into
tubing and engage fully.
4. Check full tubing
insertion at view hole of
sleeve.
5. Insert appropriate
PureFlow jaw into the
pressing tool and push
in holding pin until it
locks in place.
6. Open PureFlow jaw and
place at right angles on
the tting. Check inser-
tion depth.
7. Start pressing pro-
cedure.
8. After pressing, the
PureFlow jaw can be
reopened.
2a. Insert tubing into
prep tool. Push and turn
tool until no more resis-
tance is felt and the tool
spins freely.
For Pexcel
TM
/ Pextron
TM
/ FostaPex
TM
3/8” to 1” sizes
(Fosta Pex