Installation Guide
Table Of Contents
- About this Document
- Disclaimer
- Product Information
- Handling Instructions
- Installation Instructions
- Limited Warranty
- ProPress approved applications
- Minimum distance between press fittings
- ProPress standard jaws clearance requirements
- ProPress standard jaws clearance requirements between tube, wall, and floor
- ProPress compact jaws clearance requirements
- ProPress compact jaws clearance requirements between tube, wall, and floor
- ProPress rings dimensions
- ProPress rings with V1 Actuator clearance requirements
- ProPress rings with V2 Actuator clearance requirements
- ProPress rings with V1 Actuator clearance requirements between tube, wall, and floor
- ProPress rings with V2 Actuator clearance requirements between tube, wall, and floor
- ProPress rings with C1 Actuator clearance requirements between tube, wall, and floor
- ProPress XL-C rings dimensions
- ProPress XL-C rings clearance requirements
- ProPress XL-C rings clearance requirements between tube, wall, and floor
- Minimum distance between existing soldered or brazed fitting and ProPress fitting
- Minimum distance between existing ProPress fitting and soldered or brazed fitting
- Minimum insertion depths for ProPress ½" to 2" fittings
- Insertion depths for ProPress ½" to 2" no-stop couplings
- Insertion depths for ProPress ½" to 2" extended no-stop couplings
- Minimum insertion depths ProPress 2½" to 4" fittings
- Insertion depths for ProPress 2½" to 4" no-stop couplings
IM-PP 724607 0320 ProPress
©2020, Viega
®
, FostaPEX
®
, GeoFusion
®
, ManaBloc
®
, MegaPress
®
, ProPress
®
, SeaPress
®
, Smart
Connect
®
, Climate Mat
®
, Climate Panel
®
, Climate Trak
®
, PureFlow
®
, XL
®
, XL-C
®
, Visign
®
, Visign for
Style
®
, Visign for More
®
, Visign for Care
®
, Visign for Public
®
, Viega Eco Plus
®
, and Viega: Connected
in quality
®
are trademarks of Viega Holding GmbH & Co. KG. Eco Brass
®
is a registered trademark
of Mitsubishi Shindoh Co., LTD. RIDGID
®
is a registered trademark of RIDGID, Inc. LoopCAD
®
is a
registered trademark of Avenir Software Inc. Radel
®
R is a registered trademark of Solvay Advanced
Polymers, LLC. LEED
®
is a registered trademark of the U.S. Green Building Council
®
.
Viega LLC
585 Interlocken Blvd.
Broomfield, CO 80021
Phone (800) 976-9819
www.viega.us