PEX Installation Manual
Table Of Contents
- 1 Introduction
- 2 Codes, Standards and Certifications
- 3 Viega PEX Installation Methods
- 4 Viega Manifolds
- 5 Viega PEX Press Fittings
- 6 Viega PEX Crimp Fittings
- 7 ViegaPEX Ultra Tubing
- 8 Viega FostaPEX Tubing
- 9 Viega PEX System Design and Sizing
- 10 System Sizing and Calculations
- 11 Water Service Installation
- 12 Installing the ManaBloc
- 13 Mounting the ManaBloc
- 14 Installing Manifold Distribution Lines
- 15 Installing the ViegaPEX Ultra Tubing System
- 16 Fastening the Viega PEX System
- 17 Installing Viega PEX Fittings
- 18 Pressure Testing Viega PEX Systems
- 19 System Disinfection
- 20 Warranty
IM-PF 724596 0416
12
5.4 PEX Press tools
5.4.1 PEX Press hand tools
The Viega PEX Press connection must always be
carried out with the aid of a Viega PEX Press tool.
The hand tool incorporates a forced compression
mechanism to complete a secure connection each
time. A ratchet inside the tool prevents the tool
from being opened until the proper force has been
applied to the press sleeve. A safety release screw
allows the tool to be opened at any time, but any
connection made without full tool compression
must be repressed. The tool handles are color
coded to match the PEX Press tool locator rings.
The reduced grip feature permits one-handed
operation, making the Viega PEX Press system
ideal for tight spaces and awkward locations. The
compression of the tool also allows press connections
to be made in temperatures as low as -4°F.
5.4.2 PEX Press power tools
The Viega PEX Press connection may also be carried
out with a Viega power tool. These RIDGID tools are
designed to make the same consistent press as the
Viega PEX Press hand tools. The compression of the
tool also allows press connections to be made in
temperatures as low as 23°F.
Compact Power Tool
RP-200-B Kit