Install Instructions

VIEGA • One Company... One Partner... Delivering System Solutions.
301 N. Main, Floor 9 • Wichita, KS 67202 • Ph: 877-Viega-NA • Fax: [phone] • E-Mail: [e-mail] • www.viega-na.com
Product Instructions
Washing Machine & Ice Maker Boxes
PI-PF-57000 0307
1 of 2
Installation
1. Position box between studs at
desired height.
2. Secure box to a backing board
with screws, or to the front of
stud(s) using the nailing ear(s).
In either case the front edge of
the box should be flush with
wall material.
3. Cut or punch opening in bottom
of box if necessary for 2”
plastic drain pipe and solvent
cement pipe to connection on
bottom of box (washing
machine boxes only).
4. Connect ViegaPEX, ViegaPEX
Ultra or FostaPEX tubing to
PureFlow barb(s) on valve(s)
as described on reverse of this
sheet.
5. Install face plate by pushing
plate into box until plate is flush
against wall material.
Dimensions
Washing Machine Box
(box dimensions without face
plate or valves)
Height: 6-5/8”
Width: 7-3/4”
Depth: 3”
Face plate:
8-1/4” high x 10-3/8” wide
Ice Maker Box
(box dimensions without face
plate or valves)
Height: 5-1/4”
Width: 5-1/4”
Depth: 2-1/2”
Face plate:
6-3/4” high x 6-3/4” wide
Stud
Backing board fastened between studs
Solvent cement drain connection
PEX Pipe
Face plate
Valve outlet
Wall material