Submittal Package Viega PureFlow® Press Fittings for use with PureFlow PEX Tubing Project Date Engineer Contractor Submitted by Approved by SM-PF 1119 PureFlow Press Fittings Date Approved by Date 1 of 25
Table of Contents Table of Contents Potable Water 1 Residential Fire Sprinkler 2 3 Tech Data Sheets___________________________________________ 3 PureFlow Press Zero Lead Bronze Fittings________________________ 3 PureFlow PEX Tubing_________________________________________ 5 FostaPEX® Tubing____________________________________________ 9 PureFlow PEX Tubing with Corrugated Sleeving__________________ 12 Product Instructions_______________________________________ 13 Viega PureFlow Press Fittings__________
Tech Data Sheets 1 Tech Data Sheets PureFlow Press Zero Lead Bronze Fittings PureFlow Press Zero Lead Bronze Fittings with Attached Stainless Steel Press Sleeves for Viega PureFlow PEX, Barrier and FostaPEX SDR-9 Cross-linked Polyethylene (PEX) tubing.
Tech Data Sheets Recommended Uses Viega PureFlow Press Zero Lead Bronze fittings with attached stainless steel press sleeves are intended and recommended for use in: ■ Potable water distribution systems with Viega PureFlow PEX and FostaPEX tubing ■ Hydronic heating, snow melt, and cooling systems ■ Viega PureFlow PEX, Barrier PEX, and FostaPEX tubing meet the requirements of ASTM F876 and residential fire sprinkler systems per NFPA 13D.
Tech Data Sheets Tech Data Sheets PureFlow PEX Tubing Scope This material specification designates the requirements for Viega PureFlow PEX tubing. All Viega PureFlow PEX tubing is copper tube size dimension (CTS), SDR-9 wall thickness, and meets the requirements of ASTM F876 and F877. Materials Viega PureFlow PEX tubing is manufactured from a crosslinkable, high-density polyethylene produced by grafting organo-silanes onto a polyethylene base.
Tech Data Sheets Property ASTM Test Method Density Melt Index*1 (190°C/2.16 kg) Flexural Modulus*2 Tensile Strength @ Yield (2 in/min) Coefficient of Linear Thermal Expansion @ 68°F Hydrostatic Design Basis @ 73°F (23°C) Hydrostatic Design Basis @ 180°F (82°C) Vicat Softening Point Thermal Conductivity D 792 D 1238 D 790 D 638 D 696 D 2837 D 2837 D 1525 D 177 Typical Values English Units – – 120,000 psi 2,900 psi 9.2 x 10-5/°F 1,250 psi 800 psi 255°F 2.86 Btu•in/(ft2•hr•°F) SI Units 0.946 g/cc 0.
Tech Data Sheets Minimum Bend Radius CORRECT: 8 x O.D. INCORRECT: PIPE FLATTENS AT THE BEND Note: Viega PureFlow PEX tubing may be bent to a minimum of 5 x O.D. with approved bend support. Minimum Burst Pressure (psi) per ASTM F876/F877 Size 73°F (23°C) 180°F (82°C) ⅜" 620 275 ½" 480 215 ¾" 475 210 1" 475 210 1¼" 475 210 1½" 475 210 2" 475 210 Flow Velocity Table Flow Rate GPM 0.5 0.75 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 25.0 30.
Tech Data Sheets Pressure Loss Table Flow Rate GPM 0.5 0.75 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 ⅜ 2.0 4.1 7.0 14.9 25.4 38.5 53.9 ½ 1.6 3.4 5.8 8.7 12.2 16.2 20.8 25.8 31.4 44.0 60°F (16°C) Water Pressure Loss psi/ 100 ft. of Pipe ¾ 1 1¼ 1.1 1.6 2.3 3.0 3.9 4.8 5.9 8.2 10.9 14.0 17.4 21.1 25.2 29.6 34.
Tech Data Sheets Tech Data Sheets FostaPEX® Tubing FostaPEX High Density Cross-linked Polyethylene (PEX) Scope This material specification designates the requirements for Viega FostaPEX multilayer pressure pipe for hot and cold water distribution tubing and hydronic radiant heating applications. All FostaPEX tubing has a fully dimensioned inner PEX core to thecopper tube size dimension (CTS), SDR-9 wall thickness and meets the respective requirements of ASTM Standard F876 and F877.
Tech Data Sheets Property Density Melt Index 1 (190° C/2.16 kg) Coefficient of Linear Thermal Expansion @ 68° F Hydrostatic Design Basis @ 73°F (23°C) Hydrostatic Design Basis @ 180°F (82°C) ASTM Test Method D 792 D 1238 D 696 D 2837 D 2837 Typical Values English Unit SI Units – 0.944 g/cc – 8.5g/10 min 1.3x10-5in/in/°F 2.4x10-5mm/mm/°C 1250 psi 8.6 MPa 800 psi 5.5 MPa 1.
Tech Data Sheets Flow Velocity Table Flow Rate GPM 0.5 0.75 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 65.0 70.0 75.0 Pressure Loss Table Flow Velocity ft / sec ½ 0.9 1.4 1.8 2.7 3.6 4.5 5.4 6.3 7.2 8.1 9.1 10.9 ⅝ 0.6 0.9 1.2 1.9 2.5 3.1 3.7 4.3 5.0 5.6 6.2 7.4 8.7 9.9 11.2 ¾ 0.7 0.9 1.4 1.8 2.3 2.7 3.2 3.6 4.1 4.5 5.4 6.4 7.3 8.2 9.1 10.0 10.9 11.8 Velocity > 12 ft/Sec 1 0.5 0.8 1.1 1.4 1.6 1.
Tech Data Sheets Tech Data Sheets PureFlow PEX Tubing with Corrugated Sleeving Description cement applications. Viega PureFlow tubing is available with a flexible polypropylene corrugated sleeving that is preinstalled on Viega PureFlow PEX red and blue 300 foot coils in ½ and ¾ sizes.
Product Instructions 2 Product Instructions Viega PureFlow Press Fittings 1 2 3 4 5 6 7 8 9 10 11 12 low PureF 1/2” low PureF 1/2” 613 5 For the 1" tool, open the tool handles fully EN Viega PureFlow Press Fittings Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty. 1 Square off tubing to proper length.
Dimensional Documents 3 Dimensional Documents PureFlow Press Fittings PureFlow Press 90° Elbow Zero Lead Bronze - Model 2816ZL - Part No. " 93520 93540 93560 93570 93580 93590 Size (in) 1 1 ½x½ ¾x¾ 1x1 1¼ x 1¼ 1½ x 1½ 2x2 A (in) L (in) 0.47 0.59 0.88 0.95 1.14 1.33 0.97 1.09 1.50 1.81 2.01 2.38 Size (in) 1 1 ⅝x⅝ A (in) L (in) 0.59 1.09 " - PureFlow Press 90° Elbow Bronze - Model 2816NG Part No.
Dimensional Documents PureFlow Press 90° Elbow Zero Lead Bronze P x FTG - Model 2814.6ZL, 2814.7ZL Part No. " 99310 99307 99311 - Size (in) 1 2 ½x½ ½x¾ ¾x¾ A (in) A1 (in) L (in) L1 (in) 0.58 0.70 0.70 0.47 0.42 0.42 1.07 1.20 1.20 1.06 1.23 1.23 A (in) A1 (in) L (in) L1 (in) 0.58 0.70 0.70 0.47 0.42 0.42 1.07 1.20 1.20 1.06 1.23 1.23 " - PureFlow Press 90° Elbow Zero Lead Bronze P x FTG - Model 2814.5NG Part No.
Dimensional Documents PureFlow Compression 90° Elbow Zero Lead Copper CTS x Hose - Model V5053 - E Part No. 46743 Size (in) d R ⅜ CTS (½ O.D.) comp x ¾ Hose L1 (in) L2 (in) L3 (in) 1.32 1.67 1.14 - 3 - PureFlow Press Tee Zero Lead Bronze P x P x P - Model 2818ZL Part No.
Dimensional Documents PureFlow Press Adapter Zero Lead Bronze P x MPT - Model 2811ZL Part No. 84 " - 90506 90521 90526 90542 90541 90546 90562 90556 90561 90566 90571 90581 90591 Size (in) 1 2 ⅜ x ½ MPT ½ x ½ MPT ½ x ¾ MPT ¾ x ½ MPT ¾ x ¾ MPT ¾ x 1 MPT ¾ x 1¼ MPT 1 x ¾ MPT 1 x 1 MPT 1 x 1¼ MPT 1¼ x 1¼ MPT 1½ x 1½ MPT 2 x 2 MPT A (in) L (in) WS (in) 1.14 1.10 1.15 1.10 1.15 1.41 1.65 1.18 1.41 1.60 1.63 1.79 2.08 1.63 1.59 1.64 1.59 1.64 1.91 2.10 1.80 2.03 2.22 2.50 2.66 3.13 0.87 0.
Dimensional Documents PureFlow Press Adapter Smart Connect technology Zero Lead Bronze P x P - Model 2813PZL Part No. " - 99620 99626 99630 99640 99645 99660 99665 99670 99675 99680 99685 99690 Size (in) 1 2 ½x½ ½x¾ ¾x½ ¾x¾ 1x¾ 1x1 1¼ x 1 1¼ x 1¼ 1½ x 1 1½ x 1½ 2x1 2x2 A (in) L (in) 0.29 0.43 0.23 0.33 0.35 0.45 0.49 0.49 0.59 0.59 0.73 0.55 1.61 1.83 1.56 1.73 1.87 1.97 2.26 2.38 2.36 2.87 2.68 2.99 A (in) L (in) 0.23 0.33 1.56 1.73 A (in) L (in) 0.29 0.23 0.27 0.20 0.27 0.37 0.
Dimensional Documents PureFlow Press Adapter Bronze P x Copper - Model 2813.5NG Part No. " 82027 82031 Size (in) 1 2 ⅝x½ ⅝x¾ A (in) L (in) 0.25 0.27 1.24 1.52 Size (in) 1 2 ½x½ ½x¾ ¾x½ ¾x¾ ¾x1 1x1 1¼ x 1¼ 1½ x 1½ 2x2 A (in) L (in) 1.26 1.34 1.33 1.45 1.45 1.51 1.83 2.21 2.36 1.77 1.83 1.83 1.95 1.95 2.13 2.72 3.07 3.41 Size (in) 1 2 ⅝x½ ⅝x¾ A (in) L (in) 1.28 1.39 1.77 1.89 A (in) L (in) 2.50 3.54 - PureFlow Press Adapter Zero Lead Bronze P x FTG - Model 2813.
Dimensional Documents PureFlow Press Adapter Zero Lead Bronze P x PB - Model 2813.2ZL Part No. 97820 97840 Size (in) 1 2 ½x½ ¾x¾ A (in) L (in) 0.28 0.28 1.38 1.38 " - PureFlow Press Adapter Zero Lead Bronze P x Flare - Model 2892ZL Part No. 84 97140 97160 97165 Size (in) 1 2 ¾ x ¾ Flare 1 x ¾ Flare 1 x 1 Flare A (in) L (in) WS (in) 0.67 0.86 0.65 1.71 2.03 1.89 1.50 1.50 1.80 " - PureFlow Press Coupling Zero Lead Bronze P x P - Model 2815ZL Part No.
Dimensional Documents PureFlow Press Stop Valve Straight Zero Lead Chrome Plated Brass P x CTS ¼ Turn - Model 2842.3ZL Part No. 94023 94031 - E Size (in) d1 d2 ⅜ x ¼ CTS (⅜ OD) Comp ½ x ¼ CTS (⅜ OD) Comp L1 (in) L2 (in) L3 (in) 2.53 2.51 1.20 1.20 1.20 1.20 E - - PureFlow Press Stop Valve Angled Zero Lead Chrome Plated Brass P x CTS ¼ Turn - Model 2842.4ZL E Part No. 93515 93511 - Size (in) d1 d2 ⅜ x ¼ CTS (⅜ OD) Comp ½ x ¼ CTS (⅜ OD) Comp L1 (in) L2 (in) L3 (in) 2.51 2.
Dimensional Documents ProPress Valve Zero Lead Brass P x FTG - Model 2842.1ZL - E Part No. Size (in) d1 d2 L1 (in) L2 (in) L3 (in) L4 (in) 95002 ½ x ½ FTG 3.01 1.20 1.10 1.20 E - - - PureFlow Press Wall Hydrant Zero Lead Chrome Plated Brass - Model 2888.0ZL - - " 3 Part No. 97120 97121 R (in) ½ ¾ A (in) 11.7 11.8 L1 (in) 15.6 15.7 L2 (in) 12.2 12.3 PureFlow Press Port Adapter Zero Lead Bronze P x ManaBloc Port - Model 2877.3ZL Part No.
Dimensional Documents PureFlow Press Tub 90° Elbow Zero Lead Brazed Copper - Model 2820.0ZL - Part No. 3 92221 - Size (in) d R ½ x ½ Copper A (in) L1 (in) L2 (in) 6.22 6.74 3.00 A (in) L1 (in) L2 (in) 3.76 3.72 4.77 4.28 4.24 4.24 8.00 8.00 8.00 A (in) L1 (in) L2 (in) L3 (in) 3.76 3.72 4.28 4.24 8.00 8.00 6.00 6.00 " E PureFlow Press 90° Stub-out Brazed Copper P x FTG - Model 2820.1ZL - Part No.
Dimensional Documents PureFlow Press Outlet box Zero Lead for Washing Machine, Ice Maker - Model 2872.0ZL, 2872.7ZL - - - - - E E - - Part No. Size (in) d1 d2 98000 ½ PEX x ¼ O.D. 97220* ½ PEX x ¼ O.D. * with hammer arrestor Face Plate L1 (in) L2 (in) 6.80 6.80 6.80 6.80 L3 (in) 7.68 7.68 L4 (in) 5.20 5.20 Box Dimensions L5 (in) L6 (in) 2.50 5.20 2.50 5.20 L7 (in) 1.22 1.22 PureFlow Press Outlet Box Zero Lead for Washing Machine, Ice Maker - Model 2872.1US, 2872.
Dimensional Documents PureFlow Press Fire-Rated Outlet box Zero Lead for Washing Machine, Ice Maker - Model 2872.2, 2872.6 - - - - E E - Part No. Size (in) d1 d2 97006 ½ PEX x ¼ O.D. 97008* ½ PEX x ¼ O.D. * with hammer arrestor Face Plate L1 (in) L2 (in) 10.90 8.80 10.90 8.80 L3 (in) 8.20 8.20 L4 (in) 3.40 3.40 L5 (in) 7.10 7.10 PureFlow Press Fire-Rated Outlet Box Zero Lead for Washing Machine, Ice Maker - Model 2872.5, 2872.3 - - - - E E - Part No.