Manual

3
Märklin Digital-Systems und natürlich auch bei unserem
dazu kompatiblen Magnetartikeldecoder Art. 5211/5280
der Fall. Für DCC-Digitalsysteme kann unser Art. 5280 ver-
wendet werden. Im Zweifelsfalle erkundigen Sie sich bitte
beim Hersteller des von Ihnen verwendeten Digitalsystems.
Der Art. 5210 enthält zwei quasi unabhängige Steuerkreise
für die Ansteuerung von zwei mehrbegriffigen Lichtsignalen.
Hiervon ist einer speziell für die Ansteuerung eines Licht-
Vorsignals (2 oder 3 Begriffe) und der zweite für die Ansteu-
erung eines vierbegriffigen Licht-Ausfahrsignals konzipiert.
Beide Steuerkreise können jedoch auch alternativ zwei-
bzw. dreibegriffige Licht-, Block-, Sperr- oder Einfahrsignale
steuern. Soll ein Vorsignal am Mast eines Hauptsignals
angesteuert werden, so ist auch dieses durch die integrierte
und programmierbare „Dunkeltastung“ möglich.
3. Bezeichnung der Signal-LEDs
Der nachstehenden Tabelle können Sie entnehmen, welche
verschiedenen Lichtsignale an den Signalsteuerbaustein
Art. 5210 angeschlossen werden können. „Halbe“ Artikel-
nummern bedeuten, dass sich 2 Signale an einem Mast
befinden (Hauptsignal und Vorsignal). Die untenstehenden
Zahlen zeigen die 8 Möglichkeiten auf, die verschiedenen
Signale an einem Signalsteuerbaustein zu kombinieren:
Blocksignal
Block signal
Artikelnummern
Items
4011, ½ 4014
4411, ½ 4414
4811
4911
Einfahrsignal
Entry signal
Artikelnummern
Items
4012, ½ 4015
4412, ½ 4415
4912, ½ 4915
Ausfahrsignal
Exit signal
Artikelnummern
Items
4013, ½ 4016
4413, ½ 4416
4913, ½ 4916
Vorsignal
Distant signal
Artikelnummern
Items
4010, ½ 4014, ½ 4015, ½ 4016
4410, ½ 4414, ½ 4415, ½ 4416
4910, ½ 4914, ½ 4915, ½ 4916
2 - - -
1 1 - -
1 - 1 -
1 - - 1
- 2 - -
- 1 1 -
- 1 - 1
- - 1 1
rt
rd
gn
gn
rt
rd
ge
ye
gn
gn
gn
gn
rt
rd
rt
rd
ge
ye
ws
wh
ge1
ye1
ge2
ye2
gn1
gn1
gn2
gn2
Licht-Sperrsignale (Art. 4017/18, 4417/18, 4818, 4917)
werden wie Licht-Blocksignale angeschlossen.
5211/5280. For DCC digital systems you can use our de-
coder item 5280. If you are not sure about your decoder
do not hesitate to ask the manufacturer of your digital
equipment.
The module item 5210 contains two quasi-independent
control circuits for the controlling of two colour light signals
with multiple aspects. One of them is intended specifically
for a colour light distant signal (with 2 or 3 aspects), the
other one is specifically intended for an exit signal with 4
aspects. Both circuits also can be used for the controlling
of colour light signals with two or three aspects like main-,
shunting- or entry signals. If you use a distant signal with
a home signal at one mast, it is also possible because
the module item 5210 has got a programmable integrated
dark switching.
3. Labelling of the signal LEDs
In the following table you can see, which kind of colour
light signals you can connect to the control module item
5210. “Half” article numbers mean signal masts which
have got two signal shades (distant signal and main sig-
nal). The numbers on the lower half of the table show you
the 8 possibilities to combine and connect signals to one
control module item 5210.
Colour light shunting signals (item 4017/18, 4417/18,
4818, 4917) have to be connected like colour light block
signals.