Technical information

KWE P/N 394038 Versatronik 505 and 505D BACIP Gateway V1.2 February 2014 Technical information subject to change without notice
Configuring BACnet/IP Settings
Connect your computer DIRECTLY to the BACnet
interface of the gateway device. With no other
devices attached (an isolated network). Either set
your computer’s network connection to automatic
IP Address (DHCP), or set your computer’s IP
address to 192.168.88.90 (subnet mask
255.255.255.0).
Restart the Gateway by cycling the power off and
then on again.
Open a browser window and insert the following
URL: http://192.168.88.89/admin
The default user name/password is "admin" and
"admin" (without the quotes). This can be
renamed in the Change Password screen. At this
point you will see the Configuration pages.
IMPORTANT: Make sure that you remember any changes made here.
Versatronik 505 NR2/BACIP
Configuration of Gateway