Technical information

19
KWE P/N 394038 Versatronik 505 and 505D BACIP Gateway V1.2 February 2014 Technical information subject to change without notice
NOTE: The Device ID must be unique on the
entire BACnet network.
The Restore Defaults and Change Password
screens are very simplistic. When you select
Activate Configuration, it will ask you if you want
to SAVE your settings. This will then store your
new settings and reboot automatically.
You can now join the gateway to the rest of your
network, provided you have not specified a
duplicate IP Address. Any Computer on the
network should now be able to access these
configuration screens.
BACnet Device Settings
You can now reconfigure these settings according
to your network requirements. Make sure that you
press SAVE on every screen where you made
changes. The new setting will not take effect until
the Activate Configuration screen has been
confirmed. These configuration pages can now be
accessed through both the 192.168.88.89
Address, as well as the one you have selected.
The BACnet Device Settings screen looks like this:
Versatronik 505 NR2/BACIP
Configuration of Gateway Continued