Technical information

KWE P/N 394038 Versatronik 505 and 505D BACIP Gateway V1.2 February 2014 Technical information subject to change without notice

Point Point Description Unit

AI35 Zone/Cascade/Boiler Zone A1 Curve Room Temp. Normal °C/°F N Y Y Y Y Y

AI36 Zone/Cascade/Boiler Zone A1 Curve Room Temp. Reduce °C/°F N Y Y Y Y Y

AI37 Zone/Cascade/Boiler Zone M2 Supply Set-Point °C/°F N Y Y Y Y Y

AI38 Zone/Cascade/Boiler Zone M2 Supply Actual Temperature °C/°F N Y Y Y Y Y

AI39 Zone/Cascade/Boiler Zone M2 Curve Shift °K N Y Y Y Y Y

AI40 Zone/Cascade/Boiler Zone M2 Curve Slope N/A N Y Y Y Y Y

AI41 Zone/Cascade/Boiler Zone M2 Curve Room Temp. Normal °C/°F N Y Y Y Y Y

AI42 Zone/Cascade/Boiler Zone M2 Curve Room Temp. Reduce °C/°F N Y Y Y Y Y

AI43 Zone/Cascade/Boiler Zone M3 Supply Set-Point °C/°F N N N Y Y Y

AI44 Zone/Cascade/Boiler Zone M3 Supply Actual Temperature °C/°F N N N Y Y Y

AI45 Zone/Cascade/Boiler Zone M3 Curve Shift °K N N N Y Y Y

AI46 Zone/Cascade/Boiler Zone M3 Curve Slope N/A N N N Y Y Y

AI47 Zone/Cascade/Boiler Zone M3 Curve Room Temp. Normal °C/°F N N N Y Y Y

AI48 Zone/Cascade/Boiler Zone M3 Curve Room Temp. Reduce °C/°F N N N Y Y Y

Points Available Y/N

Analog Inputs Continued

Values which can be read from the Versatronik 505 NR2/BACIP Gateway

Analog Input Overview Continued

Point Point Description Unit

MI1 Boiler 1 Burner State *See table below

MI2 Boiler 2 Burner State *See table below

MI3 Boiler 3 Burner State *See table below

MI4 Boiler 4 Burner Stage *See table below

1 Off 5

2 Fault 6

3 10% 7

4 20% 8

30% 9 70%

40% 10 80%

50% 11 90%

60% 12 100%

State Value State Value State Value

Note: The burner percentage is only a control approximation and does not reflect the actual position.

Consult with burner manual or manufacturer for signal output from burner

Multi-state Burner Information—All Boiler Controls

Vitotronic 100, GC1

Vitodens 200, B2HA

Vitotronic 200, HO1

Vitotronic 300, GW2

Vitotronic 333/300-K MW1

Vitotronic 300-K, MW2

Note:

Temperature values only possible with specific

installed sensors based on particular installation.