Technical information

KWE P/N 394038 Versatronik 505 and 505D BACIP Gateway V1.2 February 2014 Technical information subject to change without notice

Point Point Description Unit

AO1 Unit settings – 0 = °C, 1 = °F N/A Y Y Y Y Y Y

AO2 Boiler 1 LON Address (Configured Value must be set during commissioning) N/A Y Y Y Y N N

AO3 Boiler 2 LON Address (Configured Value must be set during commissioning) N/A Y Y Y Y N N

AO4 Boiler 3 LON Address (Configured Value must be set during commissioning) N/A Y Y Y Y N N

AO5 Boiler 4 LON Address (Configured Value must be set during commissioning) N/A Y Y Y Y N N

AO6 Zone/Cascade/Boiler LON Address (Configured Value must be set during

commissioning)

N/A N Y Y Y Y Y

AO7 Number of Zones on the Zone/Cascade/Boiler (Configured Value must be

set during commissioning)

N/A N Y Y Y Y Y

AO8 Zone/Cascade/Boiler DHW Writeable Set-Point °C/°F Y Y Y Y Y Y

AO9 Zone/Cascade/Boiler Zone A1 Writeable Curve Shift °K N Y Y Y Y Y

AO10 Zone/Cascade/Boiler Zone A1 Writeable Curve Slope N/A N Y Y Y Y Y

AO11 Zone/Cascade/Boiler Zone A1 Writeable Curve Room Temp. Normal °C/°F N Y Y Y Y Y

AO12 Zone/Cascade/Boiler Zone A1 Writeable Curve Room Temp. Reduce °C/°F N Y Y Y Y Y

AO13 Zone/Cascade/Boiler Zone A1 Writeable Supply Set-Point °C/°F N Y Y Y Y Y

AO14 Zone/Cascade/Boiler Zone M2 Writeable Curve Shift °K N Y Y Y Y Y

AO15 Zone/Cascade/Boiler Zone M2 Writeable Curve Slope N/A N Y Y Y Y Y

AO16 Zone/Cascade/Boiler Zone M2 Writeable Curve Room Temp. Normal °C/°F N Y Y Y Y Y

AO17 Zone/Cascade/Boiler Zone M2 Writeable Curve Room Temp. Reduce °C/°F N Y Y Y Y Y

AO18 Zone/Cascade/Boiler Zone M2 Writeable Supply Set-Point °C/°F N Y Y Y Y Y

AO19 Zone/Cascade/Boiler Zone M3 Writeable Curve Shift °K N N N Y Y Y

AO20 Zone/Cascade/Boiler Zone M3 Writeable Curve Slope N/A N N N Y Y Y

AO21 Zone/Cascade/Boiler Zone M3 Writeable Curve Room Temp. Normal °C/°F N N N Y Y Y

AO22 Zone/Cascade/Boiler Zone M3 Writeable Curve Room Temp. Reduce °C/°F N N N Y Y Y

AO23 Zone/Cascade/Boiler Zone M3 Writeable Supply Set-Point °C/°F N N N Y Y Y

Points Available Y/N

Analog Outputs

Values which can be “written” to the Versatronik 505 NR2/BACIP Gateway

Analog Outputs Overview

Vitotronic 100, GC1

Vitodens 200, B2HA

Vitotronic 200, HO1

Vitotronic 300, GW2

Vitotronic 333/300-K MW1

Vitotronic 300-K, MW2

Note:

Temperature values only possible with specific

installed sensors based on particular installation.