Operating instructions

45
Fitting the burner
F
G
D
E
4x
C
B
A
1.
Fit the burner and tighten screws G
diagonally.
!
Please note
Fasten screws tightly enough
to ensure the components are
not being damaged and are
functioning correctly.
2.
Fit gas supply pipe F with a new
gasket.
3. Check the gas connections for tight-
ness.
Danger
Escaping gas leads to a risk of
explosion.
Check all fittings for gas tight-
ness.
4.
Connect cables from fan motor A,
gas train
B
, ionisation electrode
C
, ignition unit
D
and earth tab
E
.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5772 909 GB
Service