Operating instructions

83
Coding
Coding in the delivered condition Possible change
01:1 Do not adjust (only for
constant temperature
control units)
04:1 Minimum burner pause
time subject to the boiler
load (specified by boiler
coding card)
04:0 Minimum burner pause
time set permanently
(specified by boiler coding
card)
06:... Maximum limit of the boil-
er water temperature, de-
faulted in °C by the boiler
coding card
06:20
to
06:127
Maximum limit of the boiler
water temperature within
the ranges specified by the
boiler
0d:0 Do not adjust
0E:0 Do not adjust
13:1 Do not adjust
14:1 Do not adjust
15:1 Do not adjust
21:0 No service interval (hours
run) selected
21:1
to
21:100
The number of hours run
before the burner should
be serviced is adjustable
from 100 to 10 000 h
One step
≙
100 h
23:0 No interval for burner
service
23:1
to
23:24
Interval adjustable from 1
to 24 months
24:0 "Service" not shown on
display
24:1 "Service" is shown on dis-
play (the address is auto-
matically set and must be
manually reset after a serv-
ice has been carried out)
28:0 No burner interval igni-
tion
28:1
to
28:24
Time interval adjustable
from 1 to 24 h. The burner
is force-started once every
30 s (only when operating
with LPG).
2E:0 Do not adjust
2F:0 Venting program/fill pro-
gram disabled
2F:1 Venting program enabled
2F:2 Fill program enabled
Code 2
"Boiler"/group 2
(cont.)
5772 909 GB
Service