Operating instructions

Ready for operation

Setting the party mode

Vitocontrol-S, VD2/CT3/CM2

Switch on the party mode when you require central heating and domestic hot

water (if a DHW tank is installed) for a short time independently of the preset

heating and time program.

To activate the party mode

Party mode

ºC

1. Open the hinged cover on the

programming unit.

2. Press the heating circuit selector

button; the button is illuminated.

3. Press ; the button is

illuminated, the party mode

display appears in the display

window and the party tem-

perature value flashes.

4. To change the party temperature:

/ Press the / button until

the required temperature

value appears.

5. Confirm by pressing ; the

temperature value stops

flashing and is stored.

The display changes and

shows the boiler

temperature.

6. Close the hinged cover on the

programming unit.

To cancel the party mode

The party mode is cancelled the next

time the preset heating program

switches automatically to central

heating with the ”normal room

temperature”.

If you want to cancel the party mode

immediately, press the heating circuit

selector button and the button

again; the button is no longer

illuminated.

The light on the button turns off

after approx. 1 minute. The party

mode is still active.

5351 341 v1.2