Operating instructions

Settings
22
Setting the energy saving mode for the holiday period (continued) Vitocontrol-S, VD2/CT3/CM2
Departure date
Fr
1. Open the cover on the programming
unit.
2. Press the heating circuit selector
button; the button is illuminated.
3. Press ; the ”Holiday pro-
gram” display appears in the
display window.
4. Press ; the display
changes to the ”Departure
date” (actual day of the
week).
5. / Press / until the
required departure date
appears.
If you want to erase the holiday
program during the setting
procedure, press again and
confirm ”Erase? Yes” with .
Return date
Tu
6. Press to confirm;
the display changes to the
”Return date” (the return
date shown is the day
following the entered
departure date).
7. / Press / until the
required return date
appears.
8. Press to confirm;
the display changes and
shows the boiler
temperature.
9. To set the temperature for the
duration of the holiday program
(only in the ”rw” heating
program):
Press .
Set the required value with the
or button.
Confirm by pressing ; the
temperature value stops flashing
and is stored.
10. Close the hinged cover on the
programming unit.
This temperature also applies to
the reduced room temperature
outside the holiday program.
After the departure date, ”Holiday pro-
gram” and the actual date appear in
the display window.
On the return date, the boiler tempera-
ture appears in the display window.
If you want to cancel the holiday
program before the selected return
date, press again and confirm
“Erase? Yes” with .
5351 341 v1.2