Operating instructions

Settings
26
Changing the heating pattern Vitocontrol-S, VD2/CT3/CM2
Changing the heating pattern
Slope
Shift
1. Open the hinged cover on the pro-
gramming unit.
2. Press the heating circuit selector
button; the button is illuminated.
3. Press for ”Slope”
or
Press for ”Shift”.
4. / Press / until the
required value is displayed.
5. Press to confirm;
the display changes and
shows the boiler temperatu-
re.
6. Close the hinged cover on the
programming unit.
As a guide, please refer to the
table headed ”Change heating
pattern if...” on page 25.
5351 341 v1.2