Operating instructions

Scanning
28
Scanning temperatures and operating status information Vitotronic 100, GC1
You can scan various actual temperatures and operating status information
depending on the system components connected:
Data
displayed
Meaning Please note
0__01
LON participant number Equipment number within the
LON system
3__65.
°C
Boiler water temperature ––
6__45.
°C
Return temperature at aJA
(1st return temperature
sensor)
Only displayed if temperature
sensor of Therm-Control
or
temperature sensor T1
connected
8_190.
°C
Flue gas temperature Only displayed if flue gas
temperature sensor connected
9__50.
°C
Return temperature at aJB
(2nd return temperature
sensor)
Only displayed if temperature
sensor T2 connected
|
03572. h
Burner hours run
1st stage
The hours run can be reset to
”0” by pressing D.
The hours run displayed are ap-
proximate values only.
||
00572. h
Burner hours run
2nd stage
The hours run can be reset to
”0” by pressing D.
The hours run displayed are ap-
proximate values only.
|||
30417.
Burner starts The number of burner starts can
be reset to ”0” by pressing D.
60 °C
0_...61
1. Press ; the first tempera-
ture appears in the display
window.
2. / Press / to scan other
data (see table above).
3. Press to exit the scanning
mode.
The display changes and
shows the boiler water
temperature.
5351 341 v1.2