Operating instructions

Scanning
29
Scanning temperatures and operating status information Vitocontrol-S, VD2/CT3/CM2
You can scan various actual temperatures and operating status information
depending on the system components connected and the settings made.
Participant no.
Holiday program
with dates of departure and return
Holiday program active
Current Outdoor temperature
Boiler sequence
Common supply temperature
Current boiler temperature for each
boiler (1-4)
Flue gas temperature
Sensor aJA
Sensor aJB
Current domestic hot water tem-
perature
– DHW temperature 1
– DHW temperature 2
Current supply temperature
Current room temperature for each
heating circuit
Time
Date
Output 20 ON/OFF
Output 29 ON/OFF
Output 52 Open/Closed
DHW pump ON/OFF
DHW re-circulation pump ON/OFF
Heating circuit pump ON/OFF
Mixing valve Open/Closed
Solar pump ON/OFF
Solar pump run hours
Various languages
Equipment number within the
LON system
if entered
if holiday program is activated
if sensor installed
if sensor installed
if sensor installed
if sensor installed
if 2 DHW tank temperature
sensors are connected
for mixing valve circuit M2 and
M3, if sensor connected
if Vitotrol remote control installed
The language required for
permanent use in the display can
be selected with the button.
iParticipant No.
i °C
1. Open the hinged cover on the pro-
gramming unit.
2. Press the heating circuit selector
button; the button is illuminated.
3. Press ; the ”Participant
No.” appears in the display
window.
4. / Press / to scan other da-
ta.
5. Press to exit the scanning
mode.
The display changes and
shows the boiler tempera-
ture.
6. Close the hinged cover on the pro-
gramming unit.
To scan the heating program, party or
energy saving mode
Press the heating circuit selector
button;
The button on the active program is
illuminated.
5351 341 v1.2