Operating instructions

Ready for operation
7
Overview of controls and indicators Vitocontrol-S, VD2/CT3/CM2
Emissions test switch (see pg. 34)
Heating circuit selector buttons (pg.8)
Display window (pg.8)
Normal room temperature (pg. 11)
Heating programs (pg. 10)
Control on/off switch (pg. 14)
Fuse F1
Energy saving mode (pg. 13)
Party mode (pg. 12)
Hinged cover of programming unit
Operating status indicator (green)
Fault indicator (red)
Time program for central heating
(pg. 16)
Time program for domestic hot water
heating (pg. 18)
Other symbols (pg.8)
Time program for DHW re-circulation
pump (pg. 15)
Holiday program (pg. 21)
Information
Confirmation
Factory settings
Setting buttons
Domestic hot water temperature
(pg. 21)
Reduced room temperature (pg. 11)
Time/date
Heating curve shift (pg. 26)
Heating curve slope (pg. 26)
Hinged cover of propgramming unit
5351 341 v1.2
Boiler sequence
1-23-4
Boiler sequence
1-23-4