Technical information

Installation of Vitocontrol-S, VD2/CT3-MW1
Control Installation Continued
1 The front control housing is held
in place by a support rod. The
support rod is swung down from
the front housing section.
2 Insert plug X20 into its
respective socket.
3 Insert plug X10 into its
respective socket.
4 Swing the support rod upwards
by lifting rod from its locating
hole.
5 Front cover is now able to swing
down and close.
6 The control can be opened by
swinging front section upwards.
7 Unclick the support rod and
swing down. Insert into hole in
control to properly support front
housing.
3
2
4
1
5
6
7
Section 2
Section 2.4
15
5346540 v1.0 09/2006 Technical information subject to change without notice