Operating instructions

144
Vitocal 242-G, 230 V
Vitocal 242-G Type BWT 106 BWT 108 BWT 110
Heating output data at 5 K spread
(to EN 14511, B0/W35 °C)
Rated output kW 6.0 7.8 10.1
Cooling capacity kW 4.6 6.0 7.9
Power consumption kW 1.50 1.85 2.34
Coefficient of performance ∊ (COP)
4.0 4.2 4.3
Heating output data at 10 K
spread (to EN 255, B0/W35 °C)
Rated output kW 6.2 8.0 10.4
Cooling capacity kW 4.9 6.4 8.3
Power consumption kW 1.45 1.77 2.27
Coefficient of performance ∊ (COP),
heating
4.3 4.5 4.6
Primary circuit (brine)
Capacity l 2.8 3.1 3.4
Minimum flow rate at 5 K spread
(always maintain)
l/h 870 1050 1450
Maximum external pressure drop
(RFH) at minimum flow rate
mbar 670 640 590
Max. inlet temperature °C 25 25 25
Min. inlet temperature °C –5 –5 –5
Secondary circuit (heating water)
Content, heat pump l 3.3 3.5 3.8
Content, total l 6.2 6.4 6.7
Minimum flow rate at 10 K spread
(always maintain)
l/h
540
*3
710 910
Maximum external pressure drop
(RFH) at minimum flow rate
mbar 580 581 540
Max. flow temperature °C 60 60 60
Solar circuit
Capacity l 7.2 7.2 7.2
Instantaneous heating water
heater
Heating output kW 9.0 (single stage)
Rated voltage 1/N/PE 230 V/50 Hz
Fuse protection 3× B16A single pole
*3
600 l/h with instantaneous heating water heater
Specification
Specification
(cont.)
5441 603 GB