Operating instructions

75
Danger
Contact with 'live' components
can lead to severe injury from
electric current.
Before working on the equip-
ment, always ensure that the
power circuit is also at zero
volt.
Removing the fuse does not
switch the power circuit to zero
volt.
Appliance too noisy
Possible causes:
■ Transport locking bracket not
removed: See page 22.
■ Control unit door not tightly sealed:
See page 20.
■
Secondary circuit return line A
touches the primary circuit return line
B
or other lines or the compressor.
A
B
Troubleshooting
Repairs
(cont.)
5441 603 GB
Service