Operating instructions

Service menu:

1. Press OK + å simultaneously for

approx. 4 s.

2. "Coding level 1"

3. "Compressor"

4. Select parameter.

5000 Enable compressor

"Enable 5000"

Enabling the compressor stage.

Note

Never block the heat pump compressor

in standard mode.

Valu

Explanation

"1" Compressor stage is used.

"0" Compressor stage is not used,

e.g. in case of a fault.

Delivered condition 1

Setting 1 / 0

5030 Heat pump output

"Output compressor stage 5030"

Type-dependent heating output of heat

pump.

This value is required to calculate the

energy statement and seasonal perform-

ance factor.

Delivered condition Specified via coding card according to rated heating output

of heat pump (e.g. 8 kW for type 108; see type plate for

rated heating output)

Setting range 1 to 255 kW

Parameter group compressor

5441 603 GB