5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
592 827 GB 11/2007
Technical Specification General Specifications and Performance Data. Vitodens 100-W WB1A Appliance Mode Combi 24 kW Combi 30 kW System 24 kW Unit Rated central heating output Tf/Tr 50/30 ºC (condensing) kW 8 to 24 8 to 30 8 to 24 Tf/Tr 80/60 ºC (non condensing) kW 7.3 to 21.8 7.3 to 27.3 7.3 to 21.8 Rated central heating input (net) kW 7.4 to 22.3 7.4 to 28.0 7.4 to 22.3 Domestic hot water output range kW 21.8 27.3 n/a Maximum gas rate (CH mode) m3/h 2.36 2.96 2.
5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
5592 827 GB 11/2007
Preparing for Installation (cont.) Plume kit installation instructions The plume kit enables the relocation of the flue outlet of a standard horizontal flue system to another position and is available as an optional extra, please contact your supplier for further information. Routing options 5592 827 GB 11/2007 A Plume kit standard delivery 2m max length Ensure the max. length of the entire balanced flue system is not exceeded. The max.
Preparing for Installation (cont.) Flue kit installation instructions 1. Start 2. Remove the nozzle of the wall terminal with a tool (screwdriver) 14 5592 827 GB 11/2007 3. Mount the 90º. Its main advantage is that you can install this bend into the necessary angle by simply turning the outlet. Please do so.
Preparing for Installation (cont.) Flue kit installation instructions 5592 827 GB 11/2007 4. Connect the pipe to the bend. 5. Brace the pipe to the bend. 6. Continue step 4 and 5 until the desired height is reached. 7. Connect the 87º bend with bird mesh to the last mounted pipe.
Preparing for Installation (cont.) Fitting the plume kit (cont.) 6. Fit the flue pipes and bends in accordance with the selected installation method and secure with the fixing clamps supplied. 7. Insert the rodent protection grill into the uppermost bend. Detailed recommendations for air supply are given in BS 5440:2. Please see additional notes below. 16 • It is not necessary to have a purpose provided air vent in the room or internal space in which the appliance is installed.
Hydraulic connections Heating System (typical system designs) • The Vitodens 100-W is designed for connection to sealed central heating water systems only. • A sealed system must only be filled by a competent person. Combination boiler Note The boiler incorporates an internal bypass to ensure adequate water flow. Certain thermostatic radiator valve manufacturers may require that a bypass valve is fitted in addition to the integral by pass.
5592 827 GB 11/2007 18
5592 827 GB 11/2007 19
5592 827 GB 11/2007 20
Preparing for Installation (cont.) Installation requirements Statutory requirements The appliance is suitable only for installation in GB and IE and should be installed in accordance with the rules in force. In GB, a corgi Registered Installer must carry out the installation. It must be carried out in accordance with the relevant requirements of the: Gas safety (installation and use) regulations (current issue) It is in your own interest and safety to ensure that the law is complied with.
5592 827 GB 11/2007 22
5592 827 GB 11/2007 23
5592 827 GB 11/2007 24
5592 827 GB 11/2007 25
5592 827 GB 11/2007 26
5592 827 GB 11/2007 27
5592 827 GB 11/2007 28
5592 827 GB 11/2007 29
5592 827 GB 11/2007 30
System boiler only 5592 827 GB 11/2007 Y-plan and S-plan system 31
System boiler only 32 5592 827 GB 11/2007 Y-plan system
System boiler only 5592 827 GB 11/2007 Y-plan system (cont.
System boiler only 34 5592 827 GB 11/2007 S-plan system
System boiler only 5592 827 GB 11/2007 S-plan system (cont.
5592 827 GB 11/2007 36
5592 827 GB 11/2007 The flow rate may vary by approx. 10%. If necessary, a pressure reading valve must be fitted to the main supply before the DHW inlet connection.
5592 827 GB 11/2007 38
5592 827 GB 11/2007 39
5592 827 GB 11/2007 40
5592 827 GB 11/2007 41
5592 827 GB 11/2007 42
5592 827 GB 11/2007 43
5592 827 GB 11/2007 44
5592 827 GB 11/2007 45
5592 827 GB 11/2007 46
5592 827 GB 11/2007 47
5592 827 GB 11/2007 48
5592 827 GB 11/2007 49
5592 827 GB 11/2007 50
5592 827 GB 11/2007 51
5592 827 GB 11/2007 52
5592 827 GB 11/2007 53
5592 827 GB 11/2007 54
92 827 GB 11/2007 55
5592 827 GB 11/2007 56
5592 827 GB 11/2007 57
5592 827 GB 11/2007 58
5592 827 GB 11/2007 59
5592 827 GB 11/2007 60
5592 827 GB 11/2007 61
5592 827 GB 11/2007 62
5592 827 GB 11/2007 63
5592 827 GB 11/2007 64
5592 827 GB 11/2007 65
5592 827 GB 11/2007 66
5592 827 GB 11/2007 67
5592 827 GB 11/2007 68
5592 827 GB 11/2007 69
5592 827 GB 11/2007 70
5592 827 GB 11/2007 71
5592 827 GB 11/2007 72
5592 827 GB 11/2007 73
5592 827 GB 11/2007 74
5592 827 GB 11/2007 75
5592 827 GB 11/2007 76
5592 827 GB 11/2007 77
5592 827 GB 11/2007 78
5592 827 GB 11/2007 79
5592 827 GB 11/2007 80
5592 827 GB 11/2007 81
5592 827 GB 11/2007 82
5592 827 GB 11/2007 83
5592 827 GB 11/2007 84
5592 827 GB 11/2007 85
5592 827 GB 11/2007 86
5592 827 GB 11/2007 87
5592 827 GB 11/2007 88
5592 827 GB 11/2007 89
5592 827 GB 11/2007 90
5592 827 GB 11/2007 91
5592 827 GB 11/2007 92
5592 827 GB 11/2007 93
5592 827 GB 11/2007 94
5592 827 GB 11/2007 95
5592 827 GB 11/2007 96
5592 827 GB 11/2007 97
5592 827 GB 11/2007 98
5592 827 GB 11/2007 99
5592 827 GB 11/2007 100
5592 827 GB 11/2007 101
5592 827 GB 11/2007 102
5592 827 GB 11/2007 103
5592 827 GB 11/2007
