Technical data

Installation on Sloped Roofs
12
Installing the Mounting Frames (continued)
Installing the mounting rails
Turn the T-slot bolts 90° for all
installation steps.
1. Secure the joining elements
into
the mounting rails
.
Make sure the mounting rail profile is as
shown. Failure to install the mounting
rail correctly will not allow proper
mounting plate connection.
2. Secure the mounting rails to the roof
bracket. The locking bolt
must be
turned 90°.
Ensure the upper and lower mounting
rails are square before tightening the
locking bolts. Meas ure f rom opposite
corners of the top and bottom rails to
ensure that array is square.
3. Hook the mounting plates
into
lower mounting rails
according to
the dimensions shown in the
illustrations on pages 10 and 11.
Make sure the mounting plate is
installed with the short bent edge
connecting onto the bottom of the
collector.
5285 710 v2.0
2.
1.
3.
Roof brackets
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT