Operating instructions

14
Service scans
Temperatures
Subject to system version, using "+" or "ć", the following temperatures can
be scanned:
Collector temperatureĂ
ĂTC. . . . . . . . . . . . . . . . . . . . . . .
Cylinder temperatureĂ ĂTS. . . . . . . . . . . . . . . . . . . . . . . . .
Sensor or thermostat
temperature (subject to
selected function)Ă
ĂT3 or TT. . . . . . . . . . . . . . . . . . . .
Maximum cylinder temperatureĂ ĂSX. .
Maximum collector temperatureĂ ĂCX
Collector limit temperatureĂ
ĂCL. . . . . . . . . . . .
Minimum collector temperatureĂ ĂCN.
Heat volume
To determine the heat volume, the
differential between the collector and
cylinder temperature, the selected
volume flow, the type of heat
transfer medium and the hours run
by the solar circuit pump are taken
into consideration.
Select AH with "+" or "ć".
Details in kWh.
Circulation pump hours run
The operating time is saved every
6 hours, i.
Ăe. max. deviations of
6Ăhours may occur during power
failures.
The value cannot be reset.
Select HO with "+" or "ć".
Details in hours.
Software version
Select VN with "+".
Please note:
For an explanation to the display symbols, see the operating instructions.
5862Ă490ĂGB