Operating instructions

25
Checking the burner gasket and the burner gauze assembly
Check burner gasket A for damage and replace if required.
Replace the burner gauze assembly if it is damaged.
4x
ACD
B
E
1.
Remove electrode B.
2. Undo the three cheese-head screws
and remove thermal insulating ring
C
.
3. Undo four Torx screws and remove
burner gauze assembly
D
with its
gasket
E
.
4. Insert and secure a new burner
gauze assembly
D
with a new gas-
ket
E
.
Fixing screw torque: 3.5 Nm.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5366 836 GB
Service