Installation guide

Single Wall Venting (Room Air Dependent)
83
Component Installation Guide (continued)
Single-wall vent termination installation
Install the vent termination coupling,
along with the bird screen, for sloped
or flat roof collars in accordance with
the manufacturer’s instructions.
General installation examples - vertical
Ensure that the venting system is
properly supported; the Vitodens boiler
is not designed to support the weight
of the venting system.
5368 815 v2.0 b
Fig.80 Sloped roof
installation
Fig.81 Flat roof
installation
Fig. 82 Sloped roof
installation with offset
IMPORTANT