Technical data

Control Technology
32
Outdoor Reset Programming Unit (continued)
Room temperature setpoint adjustment
Standard Room Temperature
A Boiler water temperature / Supply
temperature in ºC
B Outdoor temperature in ºC
C Room temperature setpoint in ºC
D Heating circuit pump “OFF”
E Heating circuit pump “ON”
1. Press “⊕”. “1r
rr
r“ flashes on the
display.
2. Press “ ” to select a heating circuit
without a mixing valve.
or
3. Press “⊕”. “2r
rr
r“ flashes on the
display.
4. Press “ ” to select a heating circuit
with mixing valve.
5. Adjust the day temperature setpoint
with rotary selector “ts“. The value
will automatically be accepted after
approx. 2 sec. The heating curve will
be adjusted accordingly along the
room temperature setpoint axis C,
which results in modified start/stop
characteristics of the heating circuit
pumps if the heating circuit pump
logic is enabled.
Temperature conversion:
˚C ˚F
-20 -4
20 68
26 79
90 194
Room Temperature Setback
A Boiler water temperature / Supply
temperature in ºC
B Outdoor temperature in ºC
C Room temperature setpoint in ºC
D Heating circuit pump “OFF”
E Heating circuit pump “ON”
1. Press “⊕”. “1r
rr
r“ flashes on the
display.
2. Press “ ” to select a heating circuit
without a mixing valve.
or
3. Press “⊕”. “2r
rr
r“ flashes on the
display.
4. Press “ ” to select a heating circuit
with a mixing valve.
5. Press “tm” for night temperature
setback.
6. Press “⊕ / “ to change value.
7. “ ” to confirm value.
Temperature conversion:
˚C ˚F
-20 -4
5 41
14 57
20 68
90 194
5418 911 v1.6
90
-20
D E
A
C
B
Fig. 18 Example 1: Adjusting the
room temperature setpoint
from 20 to 26ºC
90
-20
D E
A
C
B
Fig. 19 Example 2: Adjusting the
room temperature setback
from 5 to 14ºC