Operating instructions

6. Check t he burner gask et C for

damage.

Generally replace the burner gas-

ket every 2 years.

Checking the burner gauze assembly

Replace the bur ner gauze assemb ly if the wire me sh is damaged.

A Torx screws

B Burner ga uze

C Burner gauze gasket

D Ionisation elec trode

E Ignition electro des

1. Remove electrodes D and E.

2. Rele ase the six Torx sc rews A

and remove the burner gauze

assembly B.

3. Remov e the old burner gau ze gas-

ket C.

4. Inser t a new burner gauze a ssem-

bly with a new gasket and sec ure it

with six Torx screws.

Note

Torque: 3.5 Nm

Further details regarding the individual steps (cont.)

Initial start-up, inspection, maintenance

5692 619 GB