Operating instructions

Returning the DHW cylinder to use

A Flange lid

B Gasket

C Earth cable

D Push-on tab

1. Reconnect the DHW cylinder to the

pipework.

2. Insert new gasket B un derneath

the flange lid A.

3. Fit the flan ge lid and tighten the

screws with a maximum torque of

25 Nm.

4. Push earth cable C onto push-on

tab D.

5. Fill the cylinder with potable water.

Checking all gas equipment for soundness at operating pres-

sure

Danger

Escaping gas leads to a risk of

explosions.

Check gas equipment for

soundness.

Further details regarding the individual steps (cont.)

Initial start-up, inspection, maintenance

5692 619 GB