Operating instructions

Changing slope and level
A Changing the s lope
B Changing the level (vertical par al-
lel offset of the heating curve)
1. Change the slope with coding
address "d3 " in code 1 (s ee
page 39).
Setting range 2 to 35 ( equals slope
0.2to3.5).
2. Chang e the level in codin g address
"d4"incode1(seepage39).
Setting range -13 to +40 K.
Further details regarding the individual steps (cont.)
33
Initial start-up, inspection, maintenance
5692 619 GB