Technical data

15
INFO (Information)
1 As this tuner can receive both normal FM radio
and DAB (Digital Audio Broadcasting), it features
a function that can switch between the two
reception types. To switch between DAB and
FM, you must either press the DAB/FM button on
the front panel or the DAB/FM button on the
remote control.
2 This tuner features RDS on the FM receiver.
DAB also offers some information possibilities
that resemble RDS as we know it from FM. To
activate this information from both DAB and FM,
you must press the INFO button either on the
front panel or on the remote control. The display
will show information about for instance time and
date, name of station, name of artist, title, etc.
Note:
If the INFO button is pressed in DAB mode after
channels have been saved, the strength of the
antenna signal will also be displayed.
1 2
1
2
1 . Press the FUNCTION button on the remote until information on balance control is displayed.
2. Turn the +/- buttons (2) on the remote control or the volume button (2) on the front panel to adjust the balance.
The balance is divided in 14 steps right and left.
Note
If the balance control is not operated within five seconds, the display will return to the volume information display
»
This function is used to compensate for a non-centred listening position, and makes it possible to
adjust the stereo perspective.
EN T ER BR O WS E
- VO LU M E +
EN T ER BR O WS E
- VO LU M E +
IN F O
EN T ER BR O WS E SA VE
IN F O
EN T ER BR O WS E SA VE