Technical data

OPERATION AND FUNCTIONS
DAB tuning
When the unit is turned on for the first time, all settings will be default settings. The settings can be changed
according to your preference. When the unit is turned off the next time, these settings will automatically be
saved as the new default settings. This also applies if you unplug the unit.
When the unit has been turned on in DAB mode,
channels can be searched. This is done by means of
the AUTOTUNE function.
1. Press the AUTOTUNE button on the frontpanel (1)
or on the remote control (2) once to perform a Quick
Scan search for stations or press 2-3 seconds for a
Full Scan search.
2
1
16
Note:
In order to tune on the L band manual tuning must be
selected.
Press the INFO button for two seconds, until the
message Manual tune appears, and then press ENTER.
Use the TUNING-/+ buttons on the front panel or UP and
DOWN buttons on the remote to tune. When a frequency
white signal is reached the tuner will start to play.
Full scan
12c
The message FULL SCAN or QUICK SCAN will be
shown on the display, and you will see a bar on the
display that grows longer indicating how far the tuning
process has come.
If no channels are found, you must check if the antenna
has been correctly connected and adjusted.
IN F O
BR O WS E SA VE
IN F O
BR O WS E SA VE