Owner`s manual
2
2
Precautions
Before operating this unit, check the voltage of this unit to see if it is identical with the
voltage of your local power supply.
Unplug the unit from the wall outlet if it is not used for a long time. To disconnect the
cord, pull it out by grasping the plug.
To avoid electric shock, do not open the cabinet by unqualified personnel.
There is no user serviceable parts inside. In case of unit failure, unplug the power cord
and consult your dealer
The ventilation should not be impeded by covering the ventilation openings with items
such as newspaper, table-cloths, curtains etc.
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
To prevent fire or shock hazard, do not expose this equipment to hot places, rain,
moisture or dust.
Don’t get close to the water source when using this unit, such as near bathtub, bath
slot, ish-washing slot, washing machine to use it; also, don’t use this unit on damp
plinth or nearby swimming pool or similar close to the water source.
Do not place this unit close to strong magnetic field.
Don’t place this unit close to the damper, or the moisture will affect the life of the laser
head.
If the unit is brought directly from a cold to a warm location, or is placed in a very
damp room, moisture may condense on the lens inside the unit. Should this occur,
the unit will not operate properly. Remove the disc and leave the unit turned on for
about an hour until the moisture evaporates.
Should any solid object or liquid fall into the unit, unplug the unit and have it checked
by qualified personnel before operating it any further.
Before cleaning this unit, unplug the unit from the wall outlet first. Don’t use the cleaner
which is with liquid or aerosol (e.g. pesticide). You can use a clean cloth to clean this
unit.
Please use the connection cable to connect to unit. Don’t use accessorial equipment
recommended by non manufacturer. It may course an electric shock by using this
equipment.
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Where the Mains plug is used as the disconnect device, the disconnect device shall
remain readily operable.