Owner`s manual

11
The built-in clock shows the time on the display.
1. In standby mode, press the
button for 2 seconds or more, the hour indicator
will blink on the LED.
2. Set the hour with rotate the volume control knob on the front of the unit or +/- buttons
on the remote.
3. Press the
button, minute indicator will blink on the LED.
4. Set the minute with rotate the volume control knob on the front of the unit or +/- buttons
on the remote.
5. Press the
button, the built-in clock starts operating.
Caution:
* The operating time of every step shouldn’t be longer than 10 seconds or it will return
to the time display.
* If there is a power failure or the units power is turned off, the clock will lose its setting.


 To confirm the clock time
When you press the button, the clock time is displayed. Wait for a few
seconds until the display returns to the original display.
7
Setting the Clock Manually