User manual

33
POWERON/OFF,Standby
1. Press each power switch on both the receiver and
the CD player to turn the power on or off;
2. POWER(Standby): Puts both CD Player and Receiver
into standby, and press again to power on.
Note: Please turn off the CD player in the frontpanel
to save power waste, when you are using the receiver
only.
Power,DisplayandNumberbuttons
ExplanationoftheVFDdisplay
The system features a descriptive VFD display that
displays all the information required. Below you can see
the display and explanations of the various symbols.
Track time
Track number
Tuned frequency
FM mode
ExplanationofNumberbuttons
For CD track selection:
1. For single-digit track numbers, press1~9;
2. For two-digit track numbers, rst press the
+10 button, then press the end number button.
e.g.15, press +10 then 5 to select track 15, if 35, press
the +10 button 3 times, then press 5.
For Tuner preset:
1. Once a station is tuned, you can press the desired
number for 3 seconds, then the station is stored;
2. For single-digit preset numbers, press the number
button for 3 seconds; For two-digit preset numbers,
rst press +10 button (as CD track selecting), then
press the end number button for 3 seconds.