Operation Manual

GB GB
Bardot Operation Guide
35
Bardot Operation Guide
34
General Settings
Equaliser
Your Bardot has seven equalisation settings to suit different sound types, and you can also congure one
of your own to exactly match your requirements. Each of the equalisation settings will change the tone of
your Bardot when selected. To choose an equalisation setting:
1. Press the EQ button to select ‘Equaliser’.
2. Turn the - TUNING + knob and then press it to select Normal, Classic, Jazz, Pop, Rock, Speech, Bass or My
EQ.
3. To set up your own Equaliser prole, select ‘My EQ’, and then set the level of Treble, Bass and Loudness
using the - TUNING + knob.
Count Down Timer (Cooking Timer)
The timer can be set at one minute intervals up to 99 minutes in the future.
1. Press the MENU button, and then turn the - TUNING + knob to select
System menu. Press the - TUNING + knob to conrm.
2. Turn the - TUNING + knob to select Count Down Timer menu,
and then press the - TUNING + knob to conrm.
3. Turn the - TUNING + knob until the desired time appears in the
display, then press the - TUNING + knob to conrm.
4. To view the remaining time, follow steps 1-2 to select Count Down Timer menu again.
5. When the time is elapsed, the buzzer will sound, at an increasing volume. Any other
sound playing on your Bardot will be muted while the buzzer is sounding.
6. Press the - TUNING + knob to stop the buzzer. Otherwise the
buzzer will turn off automatically after 30 minutes.
7. To cancel an already set Count Down timer, follow steps 1-3 to set the time to 00:00 minutes.
Time and Date
Your Bardot can set its time and date from DAB, or you can set it manually. You can also select your date
and time formats.
1. Press MENU, turn the - TUNING + knob to display Time then press the - TUNING + knob to select.
Further turning of the - TUNING + knob will cycle through the options below:
Set Time/date: Manually set-up both Time and Date
Auto update: ‘Update from DAB’ or ‘No update’
Set 12/24 hour format: ‘Set 24 hour’ or ‘Set 12 hour’
Set date format: ‘DD-MM-YYYY’ or ‘MM-DD-YYYY’
2. Use the - TUNING + knob to nd and select the options you prefer.
To set time manually:
1. Select “Set Time/Date”
2. Turn the - TUNING + knob to select correct hours, press the - TUNING + knob to conrm.**
3. Turn the - TUNING + knob to select correct minutes, press the - TUNING + knob to conrm.
4. Turn the - TUNING + knob to select correct day, press the - TUNING + knob to conrm.*
5. Turn the - TUNING + knob to select correct month, press the - TUNING + knob to conrm.*
6. Turn the - TUNING + knob to select correct year, press the - TUNING + knob to conrm.
**The value of this item is affected by your hour format setting
*The order of these items are affected by your date format setting.
Alarms
Your Bardot provides highly exible dual alarms. Before setting your alarms, please set the time and date as
detailed in the previous section. Then:
1. Press the ALARM button repeatedly to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’ and press the - TUNING
+ knob to conrm. This will start the Alarm Wizard.
2. The Alarm Wizard will step you through the alarm options. Turn the - TUNING + knob to select options,
and then press the - TUNING + knob to conrm the settings and move to the next option.
(To cancel alarm setup, press ALARM button again.)
Options are as follows:
Alarm states: On or Off
Alarm time: 00:00 (manually set up the time )
Alarm duration time: 15/30/45/60/90 mins
Alarm source: DAB, FM or buzzer (If you select DAB or FM, you can choose your last listened to
station, or Preset 1, if set)
Alarm active day: Daily, Once, Weekends or Weekdays
Alarm volume: Turn the - TUNING + knob to adjust the alarm volume
3. When the display shows ‘Alarm Saved’, the alarm setting is set.
4. To temporarily switch off alarm, press the SNOOZE button when the alarm is sounding. Press the
SNOOZE button repeatedly to set Snooze period time of 5, 10, 15 or 30 minutes in turn. The selected
snooze time will show as “Snooze mm : ss” on the display.
Note: Different Snooze periods are available depending on alarm duration.
5. To turn off the Alarm, press the POWER or ALARM buttons when the alarm is sounding.