Operation Manual

GB GB
Bardot Operation Guide
37
Bardot Operation Guide
36
6. To cancel Alarm, refer to steps1-3 to set Alarm states to ‘Off’.
Backlight Level
To change the backlight level of standby mode and power on mode, press SNOOZE repeatedly while alarm
is not sounding. Or using the menu:
1. Press the MENU button and then turn the - TUNING + knob to select System menu. Press the - TUNING
+ knob to conrm.
2. Turn the - TUNING + knob to select Backlight menu and press the - TUNING + knob to conrm.
3. Turn the - TUNING + knob to select backlight level, and press the - TUNING + knob to conrm the
setting.
Power On - High
Medium
Low
Standby - High
Medium
Low
Language
1. Press the MENU button, and then turn the - TUNING + knob to select System menu. Press the - TUNING
+ knob to conrm.
2. Turn the - TUNING + knob to select Language menu and press the - TUNING + knob to conrm.
3. Turn the - TUNING + knob to select language and press the - TUNING + knob to conrm.
Factory Reset
Factory reset resets all user settings to default values, so time/date, alarm settings, presets and Bluetooth
settings are lost.
1. Press the MENU button, turn the - TUNING + knob if necessary to select System menu and press
the - TUNING + knob to conrm. Then turn the - TUNING + knob to select Factory Reset. Press the -
TUNING + knob to conrm.
2. Turn the - TUNING + knob to ‘Yes’, and then press the - TUNING + knob to conrm. Display will show
“Restarting” and your Bardot will reset to Factory settings.
Software Version
Note: The helpdesk may ask you for the software version of your product.
1. Press the MENU button, and then turn the - TUNING + knob to select SW Version. Press the - TUNING
+ knob to conrm. Display will show “SW Version” and below it your Bardot’s software version, scrolling
as necessary.
Important Safety Information – please read
Please read this guide before using your unit – it contains guidance and recommendations that can help
ensure long-lasting, trouble-free, safe operation. Please keep this guide for future reference.
Be careful. Avoid:
• Liquids: don’t expose your unit to drips or splashes, and don’t put liquid containers like vases on it or near it.
• Humidity or moisture: humid or moist places like bathrooms and steam rooms need specially-designed
equipment.
• Heat: don’t expose your unit to direct sunlight or heat from radiators or other heat sources. Audio/video
devices can generate a lot of heat; don’t put your unit on top of such devices. Don’t use naked ames
anywhere near your unit either.
• Dust and restricted airow: make sure your unit is in free-owing air to avoid overheating.
• Vibration: constant vibration can cause damage.
• Extreme climates: this unit is designed for operation in moderate climates.
IMPORTANT:
• DO NOT listen at high volume: High volumes can permanently damage hearing.
• DO NOT use equipment, especially headphones, when it could distract you from the requirements of
trafc or other safety.
• DO NOT Use equipment that is not working normally or you suspect may be faulty or damaged.
• DO NOT leave equipment switched on when it is unattended unless it is specically stated that it is
designed for unattended operation. Switch off using the switch on the equipment and make sure that your
family knows how to do this. Special arrangements may need to be made for inrm or handicapped people.
Always:
• Operate all controls as instructed in the manual.
• Ensure that all electrical connections (including the mains plug, extension leads and inter-connections
between the pieces of equipment) are properly made and in accordance with the manufacturer’s
instructions. Switch off and withdraw the mains plug before making or changing connections.