Operation Manual

Blighty Operation Guide

9. Audio setting: Default audio settings are for all stations to be reproduced in

stereo. For weak stations, this may result in poor quality audio.

Press and hold “INFO/MENU” button and then press the “ ” or “ ”

button to enter into “Audio setting”, press “OK” button, then “ ” or “ ”

button to select “Forced mono”. The audio quality can be improved using

mono.

5. To tune to stored stations, press and hold “OK” button to activate preset

function. “Preset Recall1” will show on the screen. Press “OK” button, it

will display “1: frequency”. Press the “ ” or “ ” button repeatedly to get

the station number and corresponding frequency you would like to tune to,

press “OK” button to conrm.

6. To view station information when FM radio is playing, if RDS information

is available, press “INFO/MENU” button repeatedly to scroll among RDS

RadioText, Programme Type, Frequency, Mono/Stereo, Time and Date.

Press and hold “INFO/MENU” button to return to the former playing

screen.

7. Press “ ” or “ “ to adjust volume.

8. Scan settings: Default scan settings require that FM scans stop at any

available stations (All stations). This may result in poor quality from weak

stations. Press and hold “INFO/MENU” button and enter into “Scan setting”, press

“OK” button, then “ ” or “ ” button to select “Strong stations”. Now FM scan will

only stop at stations with good signal strength.