Operation Manual
26
Hepburn Operation Guide
GB
To set time manually:
1. Select “Set Time/Date”
2. Turn the - TUNING + knob to select correct hours, press the - TUNING + knob to conrm.**
3. Turn the - TUNING + knob to select correct minutes, press the - TUNING + knob to conrm.
4. Turn the - TUNING + knob to select correct day, press the - TUNING + knob to conrm.*
5. Turn the - TUNING + knob to select correct month, press the - TUNING + knob to conrm.*
6. Turn the - TUNING + knob to select correct year, press the - TUNING + knob to conrm.
**The value of this item is aected by your hour format setting
*The order of these items are aected by your date format setting.
Alarms
Your Hepburn provides highly exible dual alarms. Before setting your alarms, please set the time and date as
detailed in the previous section. Then:
1. Press the ALARM button repeatedly to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’ and press the - TUNING + knob to
conrm. This will start the Alarm Wizard.
2. The Alarm Wizard will step you through the alarm options. Turn the - TUNING + knob to select options, and then
press the - TUNING + knob to conrm the settings and move to the next option.
(To cancel alarm setup, press ALARM button again.)
Options are as follows:
Alarm states: On or O
Alarm time: 00:00 (manually set up the time )
Alarm duration time: 15/30/45/60/90 mins
Alarm source: DAB, FM or buzzer
(If you select DAB or FM, you can choose your last listened to station, or Preset 1, if set)
Alarm active day: Daily, Once, Weekends or Weekdays
Alarm volume: Turn the - TUNING + knob to adjust the alarm volume
3. When the display shows 'Alarm Saved', the alarm setting is set.
4. To temporarily switch o alarm, press the SNOOZE button when the alarm is sounding. Press the SNOOZE button
repeatedly to set Snooze period time of 5, 10, 15 or 30 minutes in turn. The selected snooze time will show as
"Snooze mm : ss" on the display.
Note: Dierent Snooze periods are available depending on alarm duration.