Operation Manual

GB GB

Retro Mini Operation Guide

Auxiliary Connections

AUX-IN

1. To connect the auxiliary device: plug the aux-in cable into the 3.5mm AUX-IN jack at the back of the radio.

2. To switch to AUX IN, press MODE button repeatedly until the display shows AUX.

3. To control the playback of the auxiliary device you need to use the device’s own controls. You may

need to adjust volume on your Retro Mini and the auxiliary device for optimum volume and clarity.

4. Press Play/Pause button if you want to mute the music playback

Using the Headphone Jack

You can enjoy your personal music via the headphone jack. Simply plug your headphone to the headphone

jack at the back of the unit.

MyEQ

Tailor your audio experience to what you’re listening to with the MyEQ function.

1. Press the Menu button to enter into the menu list.

2. Press Left and Right button to choose “EQ Setup”, press the Centre button to conrm your selection.

3. Press Left and Right button to select our preset EQ: Flat / Rock / Pop / Jazz / Classical / Bass

4. Press Centre button to conrm the selection

Volume

2. Enable Bluetooth on your device.

3. On your device, select an option to add a new Bluetooth device.

NOTE: Adding a Bluetooth Device varies on different smart devices, if in doubt please refer to your device

manufacturers manual.

4. Start the pairing on your device. Do this by selecting “Retro Mini” from the list of available devices shown

on your device. This will connect automatically and once paired, your Retro Mini display will show

“Connected”.

NOTE: The auto pairing will search for 1 minute for available device. If nothing is paired, the display will

show “NO CONNECTION”.

5. To reconnect or disconnect from Retro Mini, press and hold the MODE button until a “Beep” sound is heard.

NOTE: You will need to disconnect any connected Bluetooth devices from Retro Mini to stream from a

different Bluetooth device.

NOTE: Bluetooth will automatically disconnect if you are out of the range of the Retro Mini.

Controlling Bluetooth music playback

You can control the music in Retro Mini to your Bluetooth device wirelessly.

1. Press Play/Pause button to play or pause the music playback.

2. Press Left and Right button to skip track or press and hold to rewind and forward.

3. Press the Vol+ and Vol - button to adjust the volume level.

NOTE: You can do vice versa, press the same type of buttons in your Bluetooth device to control the music

playback function wirelessly.