5"/17 " /19" TFT-LCD monitor USER MANUAL www.viewera.
TABLE OF CONTENTS Important Safety Instructions … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 1 1. Introduction … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 3 1.1 General information … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 3 1.2 Features … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … … 3 1.
Important Safety Instructions 1. Read the manual carefully before using the monitor. 2. Save these user manual for later use. 3. Unplug the monitor from the power source when you clean the monitor. Don't use liquid cleaners or aerosol cleaners.Use cloth to clean it. If it doesn't do, please use LCD screen cleaners. 4. Don't use attachment not recommended as they may cause hazards. 5. Please grasp the plug to unplug the connector from the wall outlet. Don't pull the power cord to unplug it. 6.
12. Please make sure that the outlet and power cord can afford the total electricity of the products. 13. Place the monitor in safe place where the cord will not be abused by persons working on it. 14. Follow all the warnings and instructions illustrated on the manual. 15. Don't overload the wall outlets and extend cords as this can result in fire or electric shocks. 16. Don't remove or open the cover to service this monitor yourself.
1. Introduction 1.1 General Information This monitor is a high-performance intelligent multi-scanning color monitor .It is with TFT LCD screen and MCU digital control without radiation and glary. The shape is tiny and thin adapting to small places,save your more place. ● ● ● ● 1.2 Features Color:16.7M Power saving compliant with EPA energy star and VESA DPMS. Auto color balance .When connected to different graphic adapter,the monitor can calibrates the white and black reference voltage.
If any of above listed items are missing, please contact your dealer for technical support. 2. Installing the monitor Please consider the following advice before you install your monitor. Position Choose a place that reflects less to place your monitor. Generally ,there is a suitable angle with a window. Highness The peak of the monitor should be a little lower than your eyes when you sit down. Inclination You will feel comfortable with the sloping screen.
2.2 Signal cable connection Plug one connector of the signal cable into the VGA or DVI port and lock the two bolts to ensure firm grounding.Then plug the other one into the monitor and lock the two bolts. 2.3 Power cord connection Plug one side of the power cord into the AC adapter and the other side into AC power source outlet, then plug the output side of the AC adapter into the power port at the side of monitor. 2.
2.7 Adjust the picture In order to obtain the best visual display, you need adjust it, please refer to chapter 3 " the Operation of the monitor ". 3.Operation OSD control panel Fig.4 is elevation. Other models differ in key-press position and front panel. 3.1 Power on/off switch This is a slight touch digital control key. It is used to turn the monitor on or off. 3.2 Power LED indicator When the monitor is working, the power LED is green or blue.
3.4 OSD menu 3.4.1 The meaning of the menu in VGA mode [as Fig.5]: 1. auto adjustment 2. brightness 3. contrast 4. H-position 5. V-postion 6. clock 7. phase 8. signal source 9. color adjustment 10. volume (optional) 11. sharpness 12. OSD position/transparence 13. recall 14. language 15. exit 16. selected function name 17. resolution 18. H-frequency 19. V-frequency 20. progressive bar of adjustment 21. percentage of adjustment 22. customer LOGO 23. OSD display time S CONTR AST 10 24X 768 H: 48 .0KH Z V:60.
3.4.2 The meaning of the menu in DVI mode [as Fig.6] 1. brightness 2. contrast 3.sharpness 4. volume(optional) 5.OSD menu display time 6. transparence 7.OSD position 8. signal source 9. 9300k 10. 7800k 11. 6500k 12. User 13. Recall 14. Language 15. Eixt 16.selected function name 17. resolution 18. H-frequency 19. V-frequency 20. progressive bar of adjustment 21. precentage of adjustment 22. customer LOGO 93 00 78 00 BRIG HTN ESS 65 00 USER 1024X768 H:48.3KH Z V:60.0H Z Fig. 6 Fig.7 8 Fig.
3.4.
3.4.2 Special function 3.4.4 1. Color adjustment( ): when the function is selected, the monitor will come into the sub-menu [ Fig.7 ], there are OSD H-POSITION five functions that can be selected: a,9300k; b,7800k; c,6500k;d, USER;e,W-B.
5.Sharpness adjustment( ): Adjust the sharpness of the picture on the screen. 3.5 Safety m ode When the video signal exceeds the frequency range of the monitor , the monitor MCU will stop horizontal and vertical scanning in order to protect the monitor. Fig.11 will be display on the screen . After a few seconds, the monitor will enter turn-off mode. You need restart the computer and reset the frequency range.
Rec ommended mode: 1024× 768@6 0Hz V174/V192 NO . Mo de R esolu tion Pixel clock Hor.frequen cy 60 Hz 25. 175MHz 31.5KHz 72 Hz 3 1.5MH z 37.9KHz 3 75 Hz 3 1.5MH z 37.5KHz 4 60 Hz 40 MHz 37.9KHz 72 Hz 50 MHz 48.1KHz 75 Hz 4 9.5MH z 46.9KHz 60 Hz 65 MHz 48.4KHz 70 Hz 75 MHz 56.5KHz 1024 ×768 75 Hz 78 .75MHz 60KHz 10 1152×8 64 75 Hz 108 MHz 67.
3.7 P lug & Play This mo nitor meets the s tanda rd of V ESA DDC. W hen u sing v ideo c ard wi th VESA DDC1/2B ,it will auto- scan vi deo fr equen cy, ou tput p ower, f unctio n and other data t o PC when compu ter is on .It will g o to proper c onnec tion m ode and pr oper re soluti on fre quenc y. 3. 8 P ower mana gemen t T his monitor complies with EPA ener gy sta r requ ireme nt and meet s VESA DPM S sta ndard .
14 Mode l V1 52 Max. resolu tion 1024× 768@75Hz 1280×1024@75Hz 1280×102 4@75Hz Input resistance 75±3 % Ω 7 5±3 % Ω 75 ±3 % Ω H-frequency V-fr equency 30KHz~60KH z 55Hz ~75Hz 30KH z~81KHz 55Hz ~75Hz 30KHz~ 81KHz 55Hz~ 75Hz Power supply for Adapter 100V-240VAC V 174 60H z/50Hz 100V-240VAC V192 60H z/50Hz 100V-240VAC 60Hz/50Hz Power supply for m onitor 12VDC 3.3A 12VDC 4.2A 1 2VDC 4.2 A Rat ed voltage and MAX.
Not e: This spe cifi cati on i s subject to change without not ices. 5. Dead P ixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra g uarantees that the monito r will be replaced if the numb er of d ead pixels on our m onito r is more than 5 pixels. No dead pixel warranty may be pr ovided during the p rom otion period. 6. Warranty & Customer Service Warranty Vie wEra warrants the monit or for one ye ar on p arts, l abor a nd the LCD panel from the date of purchase.
For 1024X768, please set to “ XGA 1024 X 768 @75 Hz” 8. Trouble Shooting 1) P ower on but no p icture →M ake sure the VG A cable i s tightly connect ed from the video output c onnecto r on the video ca rd to the video in put con nector on the mo nitor. → M ake sur e you ar e using t he stand ard pow er adapt er comin g with th e monito r. → C heck yo ur video card if the driver is corre ctly insta lled. If th ere is n o video s ignal fro m the vi d eo card , “O INP UT SIG NAL” w ill show on the s creen.
→ LCD mo nitor has a n ative resolut ion which pix els are produced by cells in fixed pos itions. When a resolution different from the native resolution is chosen, the LCD mo nitor uses va rious interpo lation metho ds to achiev e the pseudo resolution. To achie ve t he optimum viewing quality, ch oose the nat ive resolutio n of the panel is recomme nded. → Use “A uto Tuning” function to a djust image quality on the OSD menu or you can hold button 2 for 3 second s to do auto tuning.