7”TFT-LCD TV MONITOR V171HT USER’ S MANUAL Rev. 1.0 www.viewera.
CONTENTS 1. Introduction 1. Introduction Product Description .................................. Page 1 Package Contents ..................................... Page 1 Product Features ….................................. Page 2 Screen Cleaning Techniques .................... Page 2 Additional ................................................ Page 3 2. Control Functions …………………….. Page 5 3. Input Diagrams ....................................... Page 14 4. Installation.......................................
Product Features High contrast ratio TFT LCD display supports resolution up to SXGA 1280 × 1024. @75Hz. Wall mountable with. Built-in speakers provide sound performance. Power management system conforms to VESA DPMS standard. Support Plug & Play, no need for driver installation. Advanced OSD controls for picture quality adjustment. Detachable stand for wall-mounting with VESA 75 (mm) bracket.
Power and extension cords ♦Do not allow anything to rest on the power cord. ♦Do not locate this product where persons will walk on the cord. ♦Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’ s safety regulations, such as VDE for Germany.
OSD Controls Tools Menu： Monitor Function Selection Menu： AUTO ADJUST Select this function to obtain the best display quality and adjust the image position . VOLUME Adjust the speaker volume by using ＋ and － buttons. BRIGHTNESS Adjust the brightness by using ＋ and － buttons. MUTE Speakers are mute. RESET Recall the factory settings CONTRAST Adjust the contrast by using ＋ and － buttons. CLOCK Adjust the clock by using ＋ and － buttons. PHASE Adjust the phase by using ＋ and － buttons.
Color Temperature and RGB Adjusting Menu： COLOR Color temperature selection --6500K, 7500K and OSD Function Selection Menu： TEMP. 9300K. EXIT OSD Exit the OSD menu. RED Red pixel brightness adjustment. GREEN Green pixel brightness adjustment. BLUE Blue pixel brightness adjustment. OSD H. POSITION OSD V. POSITION OSD DURATION Press ＋ to move the OSD to right ; Press － to move the OSD menu to left. Press ＋ to move the OSD menu upward ; Press － to move the OSD menu downward.
b.【AV,TV】 Control Button Front View ﹝5﹞ ﹝4﹞ ﹝1﹞ ﹝2﹞ ﹝3﹞ 1. Power Switch Power switch and remote sensor 2. Decrease (－) Volume decrease, OSD menu selection downward and Monitor Function Selection Menu： channel down (－) in TV mode. BRIGHTNESS Adjust the brightness by using ＋ and － buttons. 3. Increase (＋) Volume increase, OSD menu selection upward and channel up (＋) in TV mode. 4. OSD menu / Select 5. Source Selection Press this button to show the OSD menu on the screen .
** TV Mode only ** TV Function Selection Menu： CH SEARCHING TV channel auto searching Tools Menu： VOLUME Adjust the volume by using ＋ and － buttons. MUTE Speakers are mute. RESET Reset function. INPUT Select input signal (PC→AV→S-Video→TV). Page 12 CH EDIT Add or delete channel. CH FINE TUNE Tune up the signal for channel reception. AIR-CABLE Select TV signal ,air or cable, by using ＋ CH SYSTEM TV system selection. and－ buttons.
3. Input Diagrams 4. Installation Inputs 【1】 【2】 【3】 【4】 【5】 【6】 【7】 1. TV TUNER IN TV Tuner or cable signal input 2. DC IN DC power jack. 3. AV IN Composite video signal input. 4. S-VIDEO IN S-Video signal input. 5. LINE OUT Sound signal output (3 mm phone jack). 6. COMPOSITE Audio signal—right and left channel. AUDIO IN 7. VGA input Connect to PC VGA D-Sub signal. Electrical Connection Please follow the instruction below to properly connect the LCD monitor to external electrical source.
5. Product Specifications Model Spec LCD Display Pixel Pitch Max. Resolution Contrast Ratio Brightness Response Time Display Color View Angle H/ V Display Mode Power consumption Frequency TV tuner Signal Connector OSD Menu Power Adapter Operating Conditions Storage Conditions Certification Set Size Weight V171HT 17”Active matrix TFT LCD panel 0.264(H) x 0.264(V) mm 1280(H) x 1024(V), SXGA Typical: 500 : 1 (Min: 400:1) Typical : 300 cd/m2 (Min : 250) Typical: 12 ms (Max: 25) 16.
8. Windows setup 6. Dead Pixel Policy Dead pixels on the TFT LCD panel are sometimes inevitable. ViewEra guarantees that the monitor will be replaced if the number of dead pixels on our monitor exceeds 5 pixels within the first year from the date of purchase. 7. Warranty and Customer Service For the best display quality, please set the monitor type in Windows.
9. Remote Control Function 10. Trouble Shooting 1 8 10 9 7 5 4 6 3 2 NO FUNCTION 1) Power on but no picture → Make sure the VGA cable is tightly connected from the video output connector on the video card to the video input connector on the monitor. → Make sure you are using the standard power adapter coming with the monitor. → Ch e c ky o urv i de oc a r di ft hed r i ve ri sc o r r e c t l yi n s t a l l e d.
6) Residue image →I fa ni ma g er e ma i nsont hes c r e e nf ora ne x t e nd e dpe r i o doft i me ,i tma y be imprinted in the screen and leave a residue image. It is characteristic of liquid crystal and is not malfunction or deterioration of the liquid crystal. The residue image will disappear after a period of time. It is recommended to set up the screen saver for your LCD monitor. The “ Out of Range”may happen if you switch monitor A to monitor B for your PC.
