TFT-LCD TV MONITOR V180/ V180T / V190T Series USER MANUAL www.viewera.com Rev 1.
MENU ： 1. Introduction Product Description ………………...............................................................................… Package Contents……………………...............................................................................… Product Features…………………………………………………………………………..… Screen Cleaning Techniques ………………………………………………………….…… Additional ………………………………………………………………………………… 2. Control Functions Front Panel Controls ………………………………………………………………….…… OSD Controls ……………………………………………………..………………………... 3.
1.Introduction Product Description Congratulations on your purchase of the ViewEra 18”/ 19”LCD TV monitor. It incorporates high quality display into a small light weighted module. It has power-saving capabilities and emits no radiation. You will certainly benefit from this monitor in lots of ways; to name some of them, comfort safety, and environmental protection.
Product Features High contrast color TFT LCD display support resolution up to SXGA 1280 x 1024. @75Hz Compatible with IBM VGA, IBM SXGA, and Macintosh standards. Imbedded audio system provides sound performance. AV-In and S-video, TV Tuner（Optional） Power management system conforms to VESA DPMS standard. Support DDC 1/2B for Plug & Play compatibility. Advanced OSD control for picture quality adjustment. Detachable stand for wall-mounting application. Screen cleaning techniques 1.
Additional Read all of these instructions and save them for later use. Follow all warnings and instructions on the product. Product Do not cover or block the vent holes in the case. Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They may cause accident fire, electric shock or failure. Disconnect the power plug from the AC outlet if you will not use it for an extended period of time.
Power and extension cords Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’ s safety regulations, such as VDE for Germany.
2. Control Functions 1. Power switch & Remote sensor a. Front Panel Controls 【PC, Audio】 6. Menu 4.,(-), 5. (+) 7. Source 2. Channel Up(▲); Auto adjusting 3. Channel Down(▼) 1) Power Switch：Power switch LED & Remote sensor (Optional). 2) Channel Up (▲) & Auto Adjust: On TV mode, it can adjust channel up. On PC mode, it can adjust signal clock, phase and image position automatically. 3) Channel Down (▼) : On TV mode, it can adjust channel down.
Monitor Function Selection Menu： Auto Adjust：Select this function to obtain the best display quality. Brightness：Adjust the brightness by using ＋/ － button. Contrast：Adjust the contrast by using ＋/ － buttons. Clock：Adjust the clock by using ＋/ － buttons. Phase：Adjust the phase by using ＋/ － buttons. Horizontal Position：Press ＋/－, the image moves to right/ left ; Vertical Position：Press ＋/－, the image moves upward/ downward.
Tools Menu：.
Color Temperature and RGB Adjustment Menu ： Color Temperature：Color temperature selection Red：Red light brightness adjustment Green：Green light brightness adjustment Blue：Blue light brightness adjustment Page 8
OSD Function Selection Menu： Exit OSD：Exit the OSD function selection menu. OSD – H- Position：Press ＋/ － to move the OSD to right/ left. OSD –V- Position：Press ＋/ － to move the OSD menu upward/ downward. OSD DURATION：Set the OSD display time. LANGUAGE：Set the OSD display language.
b. Front Panel Controls【AV】 1. Power switch & Remote sensor 2. Menu 3.,(-), 4. (+) 5. Source 1. Power Switch：Power switch LED & Remote sensor(Optional) 2. Menu: Press this button and the OSD menu pops up on the screen. It can be used to select the OSD control options on the screen. 3. “－”:This button is used to decrease the value of selected. . 4. “＋”: This button is used to increase the value of selected. 5.
OSD Control【AV】 Monitor Function Selection Menu： Brightness：Adjust the brightness by using ＋/ － button. Contrast：Adjust the contrast by using ＋/ － buttons. Saturation：Adjust the Saturation by using ＋/ － buttons. TINT：Adjust the Tint by using ＋/ － buttons. Sharpness：Adjust the Sharpness by using ＋/ － buttons.
Tools Menu：.
OSD Function Selection Menu： Exit OSD：Exit the OSD function selection menu. OSD – H- Position：Pressing ＋/ － to move the OSD to right/ left.
c. Front Panel Controls【TV】 1. Power switch LED& Remote sensor 5.Source select 4. OSD Menu (select) 7. Channel down▼ 6. Channel up▲ 2. Adjust (decrease－) 3. Adjust (increase ＋) 1. Power switch：Power switch LED & Remote sensor 2. “－”: This button is used to decrease the value of selected. 3. “ ＋”: This button is used to increasing the value of selected. 4. Menu : Press this button and the OSD menu pops up on the screen. It can be used to select the OSD control options on the screen. 5.
Monitor Function Selection Menu： BRIGHTNESS：Adjust the brightness by using ＋/ － button. CONTAST：Adjust the contrast by using ＋/ － buttons. SATURATION：Adjust the contrast by using ＋/－ buttons. TINT：Adjust the contrast by using ＋/ － buttons. SHARPNESS：Adjust the contrast by using ＋/ － buttons.
Tools Menu：. Volume：Adjust the volume by using ＋/ － buttons. Mute：Turn off speakers. Reset：Recall factory settings. INPUT：PC→AV→S-Video→TV function select.
TV Function Selection Menu： CH Searching： TV channel auto searching and auto save channels CH EDIT：Add or delete the channel by pressing ＋/ －. CH Fine tune： Adjust the TV signal reception to get better image quality by pressing ＋/ －. AIR -Cable：Select the TV signal input by air (TV) or cable (CATV) by pressing ＋/ －.
OSD Function Selection Menu： Exit OSD：Exit the OSD function selection menu. OSD – H- Position：Press ＋/ － to move the OSD menu to right/ left. OSD –V- Position：Press ＋/ － to move the OSD menu upward/ downward. OSD DURATION：Set the OSD display time. LANGUAGE：Set the OSD display language.
3. Inputs Diagrams Inputs 【PC】 【AV】 【TV】 【1】 【2】 【3】 【4】 【5】 【6】 【7】 【1】TV TUNER IN：TV tuner Air or Cable signal input.（Option） 【2】DC IN：DC power 12V/3A input from adapter. 【3】AV IN：RCA jack AV signal input.（Option） 【4】S-VIDEO IN：S-Video signal input. （Option） 【5】LINE OUT：Sound signal output(Stereo Phone Jacket). 【6】RCA JACK AUDIO IN：Audio signal R/L input. （Option） 【7】VGAsignal input (PC IN)：Connect to PC VGA D-Sub signal .
4. Installation Electrical Connection Please follow the instruction below to properly connect the LCD monitor to external electrical source 1. Connect the female-end of the power cable to the transformer. Connect the male-end of the power cable to the wall outlet or extension cable. 2. Connect the cable from the other end of the transformer to the LCD monitor DC IN located at the back of the LCD monitor. Signal Connection 1. Power off both the LCD monitor and PC system before connecting them. 2.
4. Tilting Angles For viewing clarity, you can tilt the LCD forward (up to 10 degrees) or backward (up to 30 degrees) Down：10 o Up：30 o Page.
6. Product Specifications Type Spec LCD Display Pixel Pitch Max. Resolution Set Size Pack Size Contrast Ratio Brightness Response Time Display Color View Angle L+/RU+/DPC Interface Video Sync. Display Mode PC ,Audio in/TV Audio out Video in Frequency Signal Connector Front Control OSD Menu Power Adapter Operating Conditions Storage Conditions Certification Weight AV TV (Video) (Video option Tuner) 19”Active matrix TFT LCD panel 0.294(H) x 0.
7. Display Modes Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Resolution 640 x 350 640 x 480 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1280 x 1024 1280 x1024 H Freq (kHz) 31.469 31.469 37.861 37.500 31.469 35.156 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.760 V Freq (Hz) 70.070 59.940 72.809 75.000 70.087 56.250 60.317 72.188 75.000 60.004 70.069 75.029 60.020 75.
8. Troubleshooting 1) No power Make sure the A/C power cord is securely connected to the monitor and to the power outlet. 2) No screen image with power on (1) Make sure the video cable supplied with the monitor is tightly secured to both the video output port of the computer and the monitor. (2) Adjust the brightness and contrast from the front panel controls. 3) “ No Signal Input”message shown (1) Make sure the video cable is tightly connected to the computer and monitor.
10. Windows setup For the best display performance, please set the monitor type in Windows.
(For 1024 x 768, please set to “ SVGA 1024 x 768 @75Hz / @70Hz / @60Hz” (Option tuner setup@60Hz) Page 26
11.
Page 27
