Important Safety Instructions Thank you for selecting ViewEra's high performance, multi-function LCD monitor . To ensure your safety and extend product life, please read and follow the instructions before using it, and comply with the following safety cautions: 1 2) 3 4 5 To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case. Keep the manual for future use. Follow all the warnings and instructions strictly on the manual.
141 15 16 17 18 19 20 21 22 3 surface .Don't place the machine near or over heat source or place in built-in installation. Unplug your monitor from the electric outlet before any service is performed. . Don't use solvents, like ethyl alcohol, acetone, ethanol and hexane to clean the surface of LCD screen. Don't place the machine near water source such as bathtub, washbowl, sink, laundry tub, swimming pool, etc. The LCD panel is made of glass, the surface of screen is easy to be frayed.
1. INTRODUCTION General information HDMI supports 1080 p/i, 720 p, 576 p/i, 480 p/i video signal. Support HDCP (High-bandwith Digital Content Protection) Featured built-in speakers, they will give you audio enjoyment and save your space. With multiple connectors, you may directly connect it to your DVD player, VCR or game console, etc. The Components Video input connectors let you enjoy beautiful image quality.
2. Package Contents Unpack the package and check if you have the following items. TFT-LCD monitor (19 inch for V193 series; 22 inch for V220 series) VGA signal cable Audio cable Power cord Remote control User manual If any of the items is missing, please contact with your dealer at which you purchased the monitor.
3. Installation Note: Disconnect the power plug while installing the monitor. Plug the power plug after cable connections are done. You can find more connectors when you take off the cover board on the left of the rear cover [Fig.2] Component connection [Fig.1] Connect Y, Pb/Cb, Pr/Cr Video Out on a video player to the monitor Y, Pb/Cb, Pr/Cr Video In, and then connect Audio Out left and right on a video player to the monitor Audio In left and right. AV connection [Fig.
Power Cord Connection Plug one end of the power cord into the monitor power jack and then plug the other end into the outlet. Earphone connection [Fig.2] When you enjoy music with earphone, you can insert the plug of earphone into earphone jack on the monitor. Then the monitor will automatically mute the speakers. Base installation Please refer to Fig.3, Fig.4 Note: HDMI connector can recognize DVI signal via a HDMI Male-to-DVI Male cable. Left Right OR S-Video Audio HDMI VGA Connect to PC Fig.
4. Front Panel Control Keys SOURCE 3 CH+ 5 CH- VOL+ 6 VOL- MENU 4 POWER 7 8 1 2 1) 2) 3) 4) 5) 6) 7) 8) Power Indicator IR Sensor: It is to receive signals from remote contorl. Signal Source: press this key to enter the menu of signal source and choose signal source. Menu: press this key to enter main menu CH+/CH-: Press these two keys to adjust the options you need under OSD operation. VOL+/VOL-: Press these two keys to adjust the analog value under OSD operation.
5.
6. Basic Operations Power On Plug power cord into the outlet and press '' '' key on the front panel or press ''Power'' key on the remote control to turn on the monitor. Signal Source Selection Press ''SOURCE'' key either on the remote control or on the front panel. ''INPUT SOURCE'' will be displayed on the screen. Then press ''Up/Down'' key on remote control or "CH+/CH-" key on the front panel to choose the signal source such as TV(optional) AV, S-VIDEO, YPBPR, PC, HDMI.
OSD Menu Press ''MENU'' key on the remote control or on the front panel. The monitor will display the main menu. 1. Press ''Left/Right'' key on the remote control or ''VOL+/VOL-''key on the front panel to select the submenu, which includes PICTURE SOUND ADVANCE SYSTEM TV-CHANNEL (optional). 2. Press ''Down''key on the remote control or ''CH-'' on the front panel to enter the submenu. 3.
Picture Adjustment Select to enter the Picture Adjustment submenu. Press "Up/Down" key on the remote control or the key " CH+/CH-" on the front panel to choose what you need. Press the "Left /Right "key on the remote control or the" VOL+/VOL-" key on the front panel to adjust analog value or state (see below table). Attention 1. The Hue function is available only for NTSC system. 2.
Option Function PICTURE MODE Select picture mode 13 Description "STANDARD", "DYNAMIC", "SOFT", "PERSONAL" four states. Increasing analog value increases Contrast; Decreasing analog value decreases Contrast(0-100). CONTRAST Adjust the contrast of whole picture BRIGHTNESS Adjust brightness and blackness Increasing analog value increases brightness; of whole picture Decreasing analog value decreases brightness(0-100).
Sound Adjustment Select to enter the SOUND submenu. Press "Up/Down" key on the remote control or the key "CH+/CH-" on the front panel to choose what you need. Press the "Left / Right" key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value or state (see below table). Attention 1. Normally, the value of 50 is recommended; 2. The treble or bass analog value which is adjusted by the users will be saved under the user-defined mode. 3.
Advance Settings Select to enter the ADVANCE submenu. Press "Up/Down"key on the remote control or the key "CH+/CH-" on the front panel to choose what you need. Press the "Left / Right"key on the remote control or the " VOL+/VOL-" key on the front panel to adjust analog value or state (see below table). NR BLUE SCREEN SCALE ADVANCE Option 15 Function S E L E C T: WEAK OFF NORMAL A D J U S T: E X I T :MENU Description NR Adjust model of NR "WEAK","MIDDLE","STRONG","OFF".
System Settings Select to enter the SYSTEM submenu. Press "Up/Down" key on the remote control or the key "CH+/CH-" on the front panel to choose what you need. Press the "Left / Right"key on the remote control or the " VOL+/VOL-" key on the front panel to adjust analog value or state (see below table).