User's Manual

Rev.1.0 Page 71 of 151 VW40-152-009
VIVIX-S 1012N User Manual
4.2.4 Checking Status LED of Detector
Power LED

The power LED indicates the power status information which is permitted to the detector in green.

The power LED lights up when the power is permitted normally.

If the detector is connected with a tether interface, the power LED lights up when power is permitted
to SCU because the detector is supplied power from SCU.
Active LED

The active LED indicates status information about the possibility that the detector can be used
normally or not in orange.

The active LED is blinking when the detector is completed to boot up normally.

The Power LED is blinking when the detector turns to sleep mode.

The active LED is blinking when the wireless communication is being initialized.
Data LED

The data LED indicates status information of data processing in blue.

The data LED lights up when the detector is available to make data communication.

The data LED is blinking while the detector transmits or saves data.

If the detector AP is on, the LED blinks for 5 times right after the booting.
Detector AP LED

The AP LED lights up in blue when the detector AP is on.

The AP LED is blinking in blue when the detector switches the AP status.

The AP LED is blinking in orange while the detector is synchronizing the wireless settings.

The communication status of detector is indicated when the detector AP is off.

Wirelss communication: Green LED at the 3
rd
level or higher / Orange LED under 2
nd
level.

Wired communication: Green LED in case of 1Gbps / Orange LED in case of 100Mbps connection.
Summary List of Detector Status LED
Information
Power
LED Status LED
Data
LED
In process of booting after the power
permission
Blink
OFF
OFF
Booting completed
(Abnormal)
ON
-
-
Booting completed
(Normal)
ON ON
OFF
Ready for communication
ON ON ON
Sleep Mode
ON
Blink
OFF
In process of wireless
initialization
ON
Blink
OFF
Data Communication
(Send or Store)
ON ON
Blink
Power
OFF
OFF
OFF
OFF